您现在的位置：毕业论文 >> 论文 >> 正文

EW10J4发动机总体毕业论文

更新时间：2007-10-3: 来源：毕业论文

摘要

随着我国汽车的发展，国家对汽车的各项排放性能要求也比较高，因此，汽车的设计必须满足国家对机动车的基本要求。本课题是对EW10J4汽油机进行总体设计。

EW10J4发动机属于直列四缸汽油机。设计主要通过内燃机的热力计算、动力计算以及部分零部件的强度校核设计了合理的活塞组、曲柄连杆机构、配气机构、燃料供给系、润滑系和冷却系。使EW10J4发动机达到最佳动力性能以及最小的外型尺寸和最轻的质量，并使整机以零部件具有良好的加工工艺性，能满足汽车对发动机的各方面的要求。其内容包括：内燃机实际循环热力计算、动力学计算、活塞组结构强度计算和连杆的强度计算；并对内燃机设计的目的、任务、时间分配，注意事项以及设计前的准备工作做了必要的说明。最后，通过一些改进，使该汽油机在排放方面能达到较高的标准，从而满足能源与环境的需要。

关键词：汽油机；结构，设计。

Abstract

With the development of the vehicle for car, its performances are needed to improve more. So , the design of the vehicle for car must meet the demands of the discharge . The main aim of this paper is to design the EW10J4 gasoline engine .

The EW10J4 engine is four-in-line gasoline engine. This paper mainly conclude the thermal and power designation and the calculations of the intensity of some components. And on this bases, the precise piston assemblies, crank –connecting rod mechanism, valve train ,fuel supply systems, lubricating system and cooling system of the internal-combustion engine are designed. In order to satisfy the various aspects request of vehicle for car, enables the engine to achieve the best power performance ,the smallest outlook size and the lightest quality,as well as the good processing technology capability. Its content includes: Internal combustion engine actual cycle thermal design, dynamics computation, crank structural strength computation; and the goal, the duty, the time assignment which designs the internal combustion engine before the matters needing attention as well as the design preparations has been given necessary illustrations.