大学校园网局域网网络设计+拓扑图+代码 第3页

大学校园网局域网网络设计+拓扑图+代码 第3页
Router(config-if)#ip address 192.168.21.1 255.255.255.0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#network 192.168.20.0
Router(config-router)#network 192.168.30.0
Router(config-router)#network 192.168.21.0

Router1：
Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config原文请找腾讯752018766辣,文-论~文-网http://www.751com.cn 168.40.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet1/0
Router(config-if)#ip address 192.168.41.1 255.255.255.0
Router(config-if)#no shutdown

                                                                沈  阳  大  学
课程设计说明书                 NO.9
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#network 192.168.40.0
Router(config-router)#network 192.168.41.0
Router(config-router)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to down
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Roter2：
Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 192.168.50.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#ip address 192.168.60.1 255.255.255.0
Router(config-if)#no shutdown

                                                                沈  阳  大  学
课程设计说明书                 NO.10
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet1/0
Router(config-if)#ip address 192.168.51.1 255.255.255.0
Router(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
原文请找腾讯752018766辣,文-论~文-网http://www.751com.cn Router(config)#router rip
Router(config-router)#network 192.168.50.0
Router(config-router)#network 192.168.60.0
Router(config-router)#network 192.168.51.0
Router(config-router)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to down
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router4：
Router>enable 
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#interface FastEthernet4/0

上一页  [1] [2] [3] 

大学校园网局域网网络设计+拓扑图+代码 第3页下载如图片无法显示或论文不完整，请联系qq752018766