毕业论文论文范文课程设计实践报告法律论文英语论文教学论文医学论文农学论文艺术论文行政论文管理论文计算机安全
您现在的位置: 毕业论文 >> 英语论文 >> 正文

plc外文文献及翻译

更新时间:2016-8-21:  来源:毕业论文

plc外文文献及翻译
Programmable Logic Controllers (PLCs)
1 。About Programmable Logic Controllers (PLCs)
PLCs (programmable logic controllers) are the control hubs for a wide variety of automated systems and processes. They contain multiple inputs and outputs that use transistors and other circuitry to simulate switches and relays to control equipment. They are programmable via software interfaced via standard computer interfaces and proprietary languages and network options.

    Programmable logic controllers I/O channel specifications include total number of points, number of inputs and outputs, ability to expand, and maximum number of channels.  Number of points is the sum of the inputs and the outputs. PLCs may be specified by any possible combination of these values.  Expandable units may be stacked or linked together to increase total control capacity.  Maximum number of channels refers to the maximum total number of input and output channels in an expanded system.  PLC system specifications to consider include scan time, number of instructions, data memory, and program memory.  Scan time is the time required by the PLC to check the states of its inputs and outputs.  Instructions are standard operations (such as math functions) available to PLC software.  Data memory is the capacity for data storage.  Program memory is the capacity for control software.

    Available inputs for programmable logic controllers include DC, AC, analog, thermocouple, RTD, frequency or pulse, transistor, and interrupt inputs.  Outputs for PLCs include DC, AC, relay, analog, frequency or pulse, transistor, and triac.  Programming options for PLCs include front panel, hand held, and computer.plc外文文献及翻译

    Programmable logic controllers use a variety of software programming languages for control.  These include IEC 61131-3, sequential function chart (SFC), function block diagram (FBD), ladder diagram (LD), structured text (ST), instruction list (IL), relay ladder logic (RLL), flow chart, C, and Basic.  The IEC 61131-3 programming environment provides support for five languages specified by the global standard: Sequential Function Chart, Function Block Diagram, Ladder Diagram,2830

[1] [2] [3] [4] [5] [6] [7] [8] 下一页

plc外文文献及翻译下载如图片无法显示或论文不完整,请联系qq752018766
设为首页 | 联系站长 | 友情链接 | 网站地图 |

copyright©751com.cn 辣文论文网 严禁转载
如果本毕业论文网损害了您的利益或者侵犯了您的权利,请及时联系,我们一定会及时改正。