毕业论文论文范文课程设计实践报告法律论文英语论文教学论文医学论文农学论文艺术论文行政论文管理论文计算机安全
您现在的位置: 毕业论文 >> 英语论文 >> 正文

螺旋锥齿轮数控机床英文参考文献和翻译 第2页

更新时间:2016-9-25:  来源:毕业论文
However, high precision obtained from a special machine tools is associated with a
less flexible manufacturing process, while general NC machine tools make manufac-
turing business more flexible. Therefore, due to differences in finance situations and
business models and technology of companies, special machines and NC machines
have its own applications. The precision factor has to be considered in connection
with the above factors. In traditional methods, shape, scale and position of the con-
nected ellipses on a pair of gear and pinion tooth surfaces are influenced by a set of
adjustment parameters on the special machines. It not only really takes some time to
get the parameters right for a designed surface, but also can not meet exactly high 本文来自辣*文!论(文&网,毕业论文 www.751com.cn 加7位QQ324'9114找源文
precision requirements because of unavoidable errors in a complex mechanism. As
for the simple-structured NC machines, due to different coordination definition, the
gap on spherical involute surfaces of SBGs between design models and machining
models produces uneven machining points. Because of the SBGs complexity, direct
online measurement and control are very difficult as well. 
In this paper, a precise SBGs CAD/CAM model was developed with the Loop sub-
division algorithm. It would be more convenient in NC machining and simpler in 
precision assessment than the traditional NC algorithm. In the future, a database of
various gear standards for precision-decision and an on-line compensation system can
be developed for SBGs NC machining. Then a Loop subdivision process can be con-
trolled automatically based on required precisions in a real-time machining applica-
tion.  It would lead to a complete new CAD/CAM/CNC modelling for intelligent
SBGs manufacturing.
2   Related Work
Based on the gear geometry, a design model, named as Sculptured Surface Machining
(SSM) model, was introduced by (Suh S.H. 2001). Also the specific machining tooth
path was planned, and NC code for 4 axis and 3/4-axis was obtained. Experimental
cuts were done to prove its validity and effectiveness. Later the precision of NC ma-
chining was checked in (Suh S.H. 2002) by testing several parameters, such as tooth
profile error, tooth trace error and pitch errors. The results showed a well coherence
of the tooth surface under SSM model to that of the traditional machining model. 

上一页  [1] [2] [3] [4] [5] [6] 下一页

螺旋锥齿轮数控机床英文参考文献和翻译 第2页下载如图片无法显示或论文不完整,请联系qq752018766
设为首页 | 联系站长 | 友情链接 | 网站地图 |

copyright©751com.cn 辣文论文网 严禁转载
如果本毕业论文网损害了您的利益或者侵犯了您的权利,请及时联系,我们一定会及时改正。