Integrated simulation of the injection molding process with stereolithography molds Abstract Functional parts are needed for design verification testing, field trials, customer evaluation, and production plan¬ning. By eliminating multiple steps, the creation of the injec¬tion mold directly by a rapid prototyping (RP) process holds the best promise of reducing the time and cost needed to mold low-volume quantities of parts. The potential of this integra¬tion of injection molding with RP has been demonstrated many times. What is missing is the fundamental understanding of how the modifications to the mold material and RP manufacturing process impact both the mold design and the injection mold¬ing process. In addition, numerical simulation techniques have now become helpful tools of mold designers and process engi¬neers for traditional injection molding. But all current simulation packages for conventional injection molding are no longer ap¬plicable to this new type of injection molds, mainly because the property of the mold material changes greatly. In this paper, an integrated approach to accomplish a numerical simulation of in¬jection molding into rapid-prototyped molds is established and a corresponding simulation system is developed. Comparisons with experimental results are employed for verification, which show that the present scheme is well suited to handle RP fabri-cated stereolithography (SL) molds. 69592

Keywords  Injection molding  Numerical simulation  Rapid prototyping 

1 Introduction

In injection molding, the polymer melt at high temperature is injected into the mold under high pressure [1]. Thus, the mold material needs to have thermal and mechanical properties capa-ble of withstanding the temperatures and pressures of the mold¬ing cycle. The focus of many studies has been to create the 

injection mold directly by a rapid prototyping (RP) process. By eliminating multiple steps, this method of tooling holds the best promise of reducing the time and cost needed to create low-volume quantities of parts in a production material. The potential of integrating injection molding with RP technologies has been demonstrated many times. The properties of RP molds are very different from those of traditional metal molds. The key differ¬ences are the properties of thermal conductivity and elastic mod¬ulus (rigidity). For example, the polymers used in RP-fabricated stereolithography (SL) molds have a thermal conductivity that is less than one thousandth that of an aluminum tool. In using RP technologies to create molds, the entire mold design and injection-molding process parameters need to be modified and optimized from traditional methodologies due to the completely different tool material. However, there is still not a fundamen¬tal understanding of how the modifications to the mold tooling method and material impact both the mold design and the injec¬tion molding process parameters. One cannot obtain reasonable results by simply changing a few material properties in current models. Also, using traditional approaches when making actual parts may be generating sub-optimal results. So there is a dire need to study the interaction between the rapid tooling (RT) pro¬cess and material and injection molding, so as to establish the mold design criteria and techniques for an RT-oriented injection molding process. 

In addition, computer simulation is an effective approach for predicting the quality of molded parts. Commercially available simulation packages of the traditional injection molding process have now become routine tools of the mold designer and pro¬cess engineer [2]. Unfortunately, current simulation programs for conventional injection molding are no longer applicable to RP molds, because of the dramatically dissimilar tool material. For instance, in using the existing simulation software with alu¬minum and SL molds and comparing with experimental results, though the simulation values of part distortion are reasonable for the aluminum mold, results are unacceptable, with the error exceeding 50%. The distortion during injection molding is due to shrinkage and warpage of the plastic part, as well as the mold. For ordinarily molds, the main factor is the shrinkage and warpage of the plastic part, which is modeled accurately in cur-rent simulations. But for RP molds, the distortion of the mold has potentially more influence, which have been neglected in current models. For instance, [3] used a simple three-step simulation process to consider the mold distortion, which had too much deviation.  立体光照成型的注塑模具工艺英文文献和中文翻译:http://www.751com.cn/fanyi/lunwen_78572.html