毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

聚乳酸纳米纤维的定向电纺丝技术

时间:2018-05-21 15:33来源:毕业论文
通过控制变量的方法来研究静电纺丝制备聚PLLA纤维的纺丝条件的变化,如:纺丝溶液浓度、混合溶剂中乙醇体积、纺丝电压、接收距离等

摘要通过静电纺丝技术制备纳米纤文材料是近十几年来世界材料科学技术领域的最重要的学术与技术活动之一。静电纺丝并以其制造装置简单、纺丝成本低廉、可纺物质种类繁多、工艺可控等优点,已成为有效制备纳米纤文材料的主要途径之一,而聚乳酸(PLLA)等可生物降解聚合物的纳米纤文的制备,已经成为生物医学领域的重要研究方向。本文通过控制变量的方法来研究静电纺丝制备聚PLLA纤文的纺丝条件的变化,如:纺丝溶液浓度、混合溶剂中乙醇体积、纺丝电压、接收距离等,对纺丝纤文可纺性及形态的影响,并探讨了纺丝时间以及平行电极间距对纤文取向排列的影响。研究发现,纺丝纤文直径随着纺丝液浓度的增加而逐渐增大;纺丝直径随着在混合溶剂中非良溶剂乙醇的体积分数的增加而明显减小;过高的纺丝电压会使纤文直径均匀性下降,同时PLLA纤文在静态平行电极的取向情况受电极的间距以及纺丝时间的影响。23109
关键词  静电纺丝  聚乳酸  静态平行电极   取向
毕业设计说明书(毕业论文)外文摘要
Title Orientation electrospinning of Polylactic acid  nanofibers
Abstract
Preparation of nanofibers by electrospinning is the most important academic and technical activities in the world of materials over the last decade. Electrospinning has emerged as a powerful technique for producing high strength fibers due to its versatility,ease of use, ability to align structures and control fiber diameters. And preparation of polymer nanofibers by polylactic acid and other biodegradable has become an important research direction in the biomedical field.In this paper, a method of controlling variables had been used to find how the electrospinning conditions,for example: the concentration of the spinning solution, a mixed solvent of ethanol, spinning voltage and receiving distance, impact on spinning fiber spinnability and morphology. And to explore the effects of time and the electrode spacing on the arrangement of the spinning of the fiber orientation. The study found that the diameter of the spun fiber with increasing concentration of the spinning solution is gradually increased ; spinning diameter increases the volume fraction of poor solvent ethanol in the mixed solvent is reduced significantly ; high voltage causes a spinning uniformity of fiber diameter decreased , while the alignment of PLLA fibers prepared on the static electrodes affected by the spacing of the electrode the time.
Keywords  electrospinning  polylactic acid  static parallel electrodes   orientation 
 目  次
1  绪论    1
1.1 引言    1
1.2 静电纺丝理论    1
1.3 纤文的取向性及其收集方法    3
1.3.1 转筒收集器    3
1.3.2转盘收集器    4
1.3.3平行电极收集器    5
1.4静电纺丝纤文的主要应用方面:    6
1.4.1 纤文复合材料在组织工程的应用    6
1.4.2过滤材料方面的应用    6
1.4.3填料增强纤文方面的应用    6
1.4.4 取向纤文在神经电极方面的应用    7
1.5聚乳酸及其纤文    7
1.6  本文的研究思路和内容    8
2  静电纺丝法制备PLLA    8
2.1 实验部分    8
2.1.1 原料与仪器设备    8
2.1.2 纺丝参数的确定    9
2.1.3 具有凹槽结构的碳纳米管涂层修饰电极的制备    9
2.1.4 金相显微镜观察纺丝形貌    10
2.1.5 FESEM表征    10
2.2  结果与讨论    10 聚乳酸纳米纤维的定向电纺丝技术:http://www.751com.cn/huaxue/lunwen_16036.html
------分隔线----------------------------
推荐内容