摘要由于受系统功耗和空间的限制，为满足小型化、结构简单的需求，常规弹药激光引信采用新型的双向驱动单发单收大视场探测方案。而电机是实现双向驱动的旋转扫描系统的重要组成部分，因而为在高速动态情况下实现激光引信的精确探测，必须对其进行稳速平衡控制。25823
本文通过查阅相关文献，系统地了解电机（包括发电机与电动机等）的工作原理、种类、发展应用等，简单的了解了电机控制原理，为以后的科研打下基础。在第一章绪论中介绍了课题提出的背景及意义，并重点而系统简略的介绍了几种电机控制的基本原理与方法，初步了解了电机控制的发展历史和方向；在第二章尝试了电机的数学建模及工程计算方法；在第三章中，最终选用了并介绍了发展运用比较成熟的转速—电流双闭环PI调速系统；在第四章，对电机和已设计的调速系统进行MATLAB仿真；在第五章中分别介绍了实现系统的硬件的电源、驱动和测速模块。
关键词 直流电机 电机控制 双闭环调速系统 PI控制
毕业论文设计说明书外文摘要
Title Stable speed balancing control for laser circumferential probe rotation scanning
Abstract
Due to the limitation of space and power consumption of the system, A new type of double - way - driving single - Single - receiving large - field detection scheme is used for conventional ammunition Laser Fuze to meet the requirements of miniaturization and simple structure. The motor is an important part of the bidirectional drive rotation scanning system. In order to realize the accurate detection of laser fuze in high speed and dynamic laser fuze, the steady speed balance control must be carried on.
In this paper, by consulting relevant literature, the working principle, types, application development of motor are systematically understood, and the motor control principles are simply understood, laying the foundation for future research. In the first chapter, the background and significance of the research is introduced. In the second chapter, the mathematical modeling of the motor is attempted. In the third chapter, the basic principle and method of several motor control are briefly introduced, the development and direction of the motor control are known,and a relatively maturely developed speed - current double closed-loop proportional-integral (PI) speed control system is ultimately chosen. In the fourth chapter, based on the change of input parameters, adjusting the PID parameters, in the cases of the process of starting and sudden load operation, the MATLAB is used to simulate the behavior of motor.
Keywords DC motor the motor control Double closed-loop speed control system proportional-integral(PI) control
目 次
1 绪论 1
1.1 课题研究的背景及意义 1
1.2 电机控制国内外研究状况 1
1.3 本课题的研究内容 5
2 直流电动机数学模型及其参数的工程计算方法简介 7
2.1 直流电动机的数学模型 7
2.2 直流电动机传递函数中主要参数的工程计算方法 8
2.2.1 电磁时间常数 8
2.3.2 电机常数 8
3 电机转速控制策略 9
3.1 双闭环直流PI调速系统 9
3.2 脉宽调制转换器 10
4 转速电流双闭环调速系统的MATLAB仿真 12
4.1 转速电流双闭环调速系统 12
4.2 MATLAB仿真及其结果 13
4.2.1 电机仿真 13 激光周向探测旋转扫描的稳速平衡控制研究:http://www.751com.cn/tongxin/lunwen_19779.html