图5-5 程序流程图
VHDL程序如下：
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_ARITH.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY XZ IS
PORT (CLK   : IN STD_LOGIC;
      A     : IN STD_LOGIC_VECTOR(3 DOWNTO 0);
      OUTCLK: OUT STD_LOGIC);
END XZ;
ARCHITECTURE RT OF XZ IS
SIGNAL COUNT:INTEGER:=0;
SIGNAL  N:INTEGER;
BEGIN
PROCESS(CLK,A)
BEGIN
           CASE A IS
            WHEN"0000"=>N<=4;
            WHEN"0001"=>N<=8;
            WHEN"0010"=>N<=16;
            WHEN"0011"=>N<=32;
            WHEN"0100"=>N<=64;
            WHEN"0101"=>N<=128;
            WHEN"0110"=>N<=256;
            WHEN"0111"=>N<=512;
            WHEN"1000"=>N<=1024;
            WHEN"1001"=>N<=2048;
            WHEN"1010"=>N<=4096;
            WHEN"1011"=>N<=8192;
            WHEN"1100"=>N<=16384;
            WHEN"1101"=>N<=32768;
            WHEN"1110"=>N<=262144;
            WHEN"1111"=>N<=200000000;
            END CASE;
     IF (CLK'EVENT AND CLK='1') THEN   
      IF (COUNT=N-1) THEN
            COUNT<=0;
      ELSE
            COUNT<=COUNT+1;
            IF COUNT<(N/2) THEN
             OUTCLK<='0';
            ELSE
             OUTCLK<='1';
            END IF;
         END IF;
     END IF;
END PROCESS;
END ARCHITECTURE;
    编译生成的模块文件如图5-6所示。
                          
                         图5-6  分频器的模块文件 基于SOC技术的等精度频率计设计+源码+流程图(11):http://www.751com.cn/tongxin/lunwen_507.html