摘要：根据任务书的要求，本设计进行了年产800吨多聚磺酸-聚苯乙烯嵌段共聚物的合成工艺设计。论文编写期间查阅了大量的文献资料，了解了嵌段共聚物的种类，以及各种嵌段共聚物的制备方法，特别针对多聚磺酸-聚苯乙烯嵌段共聚物进行了具体研究分析，对其市场现状与未来发展前景进行了解，同时也了阐述了其生产工艺流程与生产过程中所用到的设备及其型号等。还对年产800吨多聚磺酸-聚苯乙烯嵌段共聚物的合成进行了车间工艺设计，详细写出了物料衡算和能量衡算的过程以及车间布置等。21633
多聚磺酸-聚苯乙烯嵌段共聚物采用如下生产流程：苯乙烯磺酸与氯甲基苯乙烯共聚。然后加入苯乙烯单体、氯化亚铜催化剂、联吡啶催化剂，在隔绝氧气条件下进行聚合。蒸去溶剂，洗涤除去催化剂，即可得到多聚磺酸-聚苯乙烯嵌段共聚物。生产过程中也考虑了低成本、低污染、高性能、可循环利用等理念对车间进行合理设计和优化，并绘制了工艺流程图。
毕业论文关键词： 嵌段共聚物、苯乙烯、聚合、苯乙烯磺酸
An annual output of 800 tons of poly sulfonated polystyrene block copolymer synthesis process design
Abstract: According to the requirements of the mission，the design is the an annual output of 800 tons of poly sulfonated polystyrene block copolymer synthesis process design. The thesis writing time access to a large number of documents to understand the types and performance of block copolymer, and various methods for preparing the block copolymer, Special detailed research and analysis for poly sulfonated polystyrene block copolymer, understand the market situation and future prospects, Also described the use of its production process and production process equipment and its types. Also conducted a workshop process design of an annual output of 800 tons of poly sulfonated polystyrene block copolymer, write the details of the material balance and energy balance and workshop layout.
Poly sulfonated polystyrene block copolymer adopts the following processes: The styrene sulfonic acid and chlorine methyl styrene by copolymerization. Then add the styrene monomer, cuprous chloride catalyst, pyridine catalyst and get together under conditions of absence of oxygen. The solvent is evaporated, washing to remove catalyst, can obtain poly sulfonate polystyrene block copolymer. The production process is also taken into account in the low cost, low pollution, high performance, can be recycled to use concepts such as rational design and optimization of workshop, and draw the process flow chart of workshop layout.
Keywords: Block copolymers, styrene, polymerization, styrene sulfonic acid
目录
摘要 i
Abstract ii
目录 iii
1. 绪论 1
1.1 本设计的任务 1
1.2 嵌段共聚物的概述 1
1.3 嵌段共聚物的制备方法 2
1.3.1 正离子聚合转化法 2
1.3.2活性聚合 3
1.3.3 其他方法 4
1.4 嵌段共聚物的性能与发展应用 5
1.4.1 性能 5
1.4.2 应用 5
1.4.3发展意义 5
1.5 聚苯乙烯 6
1.5.1 聚苯乙烯 6
1.5.2聚苯乙烯的生产与应用 8
1.5.3 聚苯乙烯的环境影响 8
1.6 氯甲基聚苯乙烯 9
1.6.1氯甲基聚苯乙烯的制备方法 9
1.6.2 合成 9
1.6.3 CMPS 的氯甲基化程度的测定 9
1.6.4诸因素对氯甲基化反应的影响 10 年产800吨多聚磺酸-聚苯乙烯嵌段共聚物的合成工艺设计:http://www.751com.cn/huaxue/lunwen_13931.html