摘要：本课题针对年产2.5万吨天然气氯化法合成甲烷氯化物的工艺设计进行一套符合实际工业生产要求的方案，为了使计算更为准确，我们先对甲烷氯化物的产品性质、用途，原料的性质进行了依据性的调查，在确定了生产的规模、生产条件后，我们调查了国内外的最先进的生产手段，最终确定了甲烷氯化法生产合成路线，方案如下：以天然气（甲烷）和氯气为原料生产甲烷氯化物，将工程布置为四个工段为：反应工段、吸收工段、中和干燥工段、精制工段。并且我们将对合成路线中的相关信息进行准确的核算，确保工程的完备，相关的内容包括了设备的物料衡算和热量衡算，生产的工艺流程，对设备的安排布置，最后使用用AUTOCAD绘制带控制点工艺流程图、车间设备布置图（主视图、俯视图）及主要设备设计图使整体工程符合科学性，同时提出了有关生产安全、人员安全、环境保护等一系列相关规定，做到经济利益最大化的同时保证符合生产标准。43668

毕业论文关键词：天然气氯化法；甲烷氯化物；氯甲烷

Annual output of 25000 tons of gas chlorination synthesis of methane chloride process design

Abstract：This topic with annual output of 25000 tons of gas chlorination synthesis of methane chloride process design for a set of meet the requirements of the actual industrial production plan, in order to make the calculation more accurate, we first to methane chloride product properties, USES, the nature of the raw material was carried out based on investigation, after the production scale, production conditions were determined, we investigated at home and abroad the most advanced means of production, ultimately determine the chlorination process to produce synthetic route of methane, the plan is as follows: with natural gas (methane) and chlorine gas as raw material to produce methane chloride, the project layout for the four stages as follows: reaction, absorption section, and refined section and drying section. And we will to the synthetic route of the relevant information accurately business accounting, to ensure the project complete, relevant content includes equipment of material balance and heat balance, the production process, for the arrangement of the equipment layout, finally use AUTOCAD drawing with locus of control process flow diagram, workshop equipment layout (main view, top view) and the main equipment design makes the whole project conforms to the scientific, at the same time put forward concerning production safety, personnel safety, environmental protection, and a series of rules to achieve economic benefit maximization, but at the same time ensure that they meet production standards.

KeyWords：Gas chlorination process；Methane chloride；Methyl chloride

目  录

1设计课题的来源 1

2产品介绍 1

  2.1 产品性质、用途、技术规检 1

  2.2 原料的性质、技术规格 2

  2.3 国内外产品需求 3

3二氯甲烷工业的发展 4

  3.1 生产技术的发展情况 4

  3.2 我国二氯甲烷生产现状 6

4设计课题的主要内容、关键问题及设计方案 7

  4.1 合成二氯甲烷反应特点 7

  4.2 生产方法的确定 7

5工艺流程确定 9

  5.1 甲烷氯化生产工艺 9 年产2.5万吨天然气氯化法合成甲烷氯化物的工艺设计:http://www.751com.cn/huaxue/lunwen_44620.html