摘要：金属薄带轧机设计主要包括机架、上、下支承辊、上、下工作辊，上支承辊安装在所述机架的工作窗口的上方，下支承辊则安装在机架的工作窗口的下方，上、下工作辊安装在工作窗口的中部，并且共同位于上、下支承辊之间，其中，上工作辊分别与上支承辊和下工作辊辊面接触，而下工作辊与下支承辊辊面接触。轧辊在轧制过程中直接或间接和轧件接触，强迫轧件产生塑性变形，因此承受很大的轧制压力、轧制力矩及动载荷。由于轧件温度高，轧辊用冷却液冷却，因此工作条件恶劣、繁重，所以对轧辊的强度、刚度、表面硬度、耐磨性、辊形都有较严格的要求，以保证轧件的质量和产量。轧辊调整装置的作用主要是调整轧辊在机架中的相作用对位置，以保证要求的压下量、精确的轧件尺寸和正常的轧制条件。上辊调整装置也称压下装置，它的用途最广，安装在所有的二辊、三辊、四辊和多辊轧机上。轧钢机机架是工作机座的重要部件，轧辊轴承座及轧辊调整装置等都安装在机架上。机架要承受轧制力，必须有足够的强度和刚度21963
毕业论文关键词： 四辊轧机; 辊缝调整; 平衡; 机架
Metal strip rolling mill design
Abstract：Metal strip rolling mill design major. It includes frame, up, down, up, or down support rolls work roller, supporting rollers on the frame work of installation in the upper part of the window, supporting rollers are installed in the frame work to the bottom of the window, on, under working roller installed in the central part of the work window, and common located on spindle, between rollers, among them, the work roll on respectively with supporting rollers and work roll under the surface contact, and work roller and under the surface contact of roll. In the process of rolling roll in directly or indirectly and rolling a contact, forced rolled piece produce plastic deformation, so under a lot of pressure, rolling rolling torque and dynamic load. Because of rolled piece to the high temperature, roll with cooling liquid cooling, so that the work conditions, hard, and so to roll strength, stiffness, surface hardness, wear resistance, roller form have a strict requirement, in order to guarantee the quality and yield of rolled piece. Roll the role of adjustment device mainly is to adjust the phase role roll in frame of position, in order to ensure that the requirements of the quantity of the pressure, precision of rolled piece size and normal rolling conditions. The top roller adjusting device also says pressure the device, it's the most versatile, installed in all two roll, three roller, four roll and more on rolling machine. Mill is the important base frame work parts, roll bearing and roll adjusting devices etc are installed on the frame. Frame shall inherit rolling force, must have the enough strength and rigidity.
Keywords: four roller mill, roll gap adjustment, balance, frame
目录
1. 绪论    1
1.1    国内外对轧钢机的研究和发展    1
1.2    轧钢机的类型和主要设备    1
1.3    设计的技术要求和主要技术参数    2
2.    轧辊的设计    2
2.1    轧辊的类型和结构    2
2.2    轧辊材料的选择    3
2.3    轧辊的结构参数    4
2.3.1 轧辊辊身直径和辊身长度的设计与计算    5
2.3.2 轧辊的重车率    6
2.3.3 轧辊辊颈尺寸d 和l确定    6
2.3.4  轧辊传动端的设计    7
2.4    轧辊的校核    7
2.4.1 轧辊的破坏分析    7
2.4.2工作辊和支承辊的组合分析    8 金属薄带轧机设计+CAD图纸+答辩PPT:http://www.751com.cn/jixie/lunwen_14410.html