小型麻花钻研磨机三维立体设计

摘要根据麻花钻的刃磨要求和工作条件，设计了小型麻花钻研磨机的总体结构，确定了小型麻花钻研磨机的外形尺寸。根据标准麻花钻钻头的几何形状特点，以及通过对主刀刃与后角及其数学模型的分析和确定，制定了以钻头夹套调整和带偏心孔的直立部为核心的小型麻花钻研磨机的辅助对刀机构和刃磨机构。同时根据各个执行机构的功能特点，设计了以钣金结构为主体的结构形式，并绘制了相应的机械结构图和零件图。根据各个组件的相对位置，合理地布置结构。对于结构中的重要零件轴进行了必要的分析和设计，并确定了相关参数。利用PRO/E三文设计软件绘制了三文立体结构图，并且利用AutoCAD绘制了二文工程图。25390
关键词钻头研磨麻花钻
毕业设计说明书（毕业论文）外文摘要
Title Small Twist Drill Grinding Machine Three-dimensional Design
Abstract
According to the grinding of twist drills and working conditions required, a small twist drill grinding machine of the overall structure is designed, the dimensions of a small twist drill grinding machine is established. According to the standard twist drill bit geometry characteristics, and through the main blade and the posterior horn and its mathematical model analysis and the identification, In the drilling clamp adjusting sleeve and with a bit eccentric hole of the upright as the core of the Department of twist drill grinding machine of supporting small-scale of the knife body and grinding bodies is developed. According to the design features of various enforcement agencies, a sheet metal structure as the main structure is designed, and draw the corresponding mechanical structure diagrams and parts drawing. According to the relative position of each component, a reasonable layout structure. Important part of structural shaft of the necessary analysis and design, and its parameters are determined. Use of PRO/E 3D design software to draw a three-dimensional structure diagram, and the use of AutoCAD drawing two-dimensional drawings.
Keywords Drill Grind Twist drill
目次
1 绪论    1
1.1引言    1
1.2小型麻花钻头研磨机的优缺点    1
2 小型麻花钻研磨机的总体设计方案及其可行性论证    2
2.1小型麻花钻研磨机及麻花钻刃磨的技术背景    2
2.2麻花钻的刃磨研究    2
2.2.1麻花钻的结构分析    3
2.2.2麻花钻的刃磨要求    3
2.4小型麻花钻研磨机的电机和轴的设计选取与校核    4
2.4.1小型麻花钻研磨机的技术要求    4
2.4.2小型麻花钻研磨机的电机选取    4
2.4.3轴的结构设计及校核    5
2.5小型麻花钻研磨机的主要零件的结构设计    9
2.5.1弹性夹片的结构设计    9
2.5.2外夹桶的结构设计    10
2.5.3钻头夹套调整座的结构设计    11
2.5.4调整块与调整旋钮的结构设计    11
2.5.5直立部的结构设计    12
2.5.6偏心套的结构设计    13
2.6小型麻花钻研磨机原理分析及可行性论证    14
2.6.1小型麻花钻研磨机整体设计原理分析及论证    14
2.7 小型麻花钻研磨机的性能和参数    21
2.8 小型麻花钻研磨机的操作步骤说明    22
结束语    25
致谢    26 小型麻花钻研磨机三维立体设计:http://www.751com.cn/jixie/lunwen_19152.html