可装定底火检测仪设计

摘要底火装定技术利用击针接触底火后、弹丸击发前的时间间隙实现信息装定，可克服现有装定技术的不足，实现新型破甲弹发射前可靠装定。本文对底火装定系统工作原理进行了分析，详细介绍了可装定底火的改进方案，并对方案进行了实验验证，通过对实验数据的分析建立底火检测仪设计方案。针对可装定底火对可检测性的设计要求，为保证检测过程的安全性，设计了基于软硬件结合的双重过流保护电路，并进一步设计完成了检测仪整体电路，对电路各模块工作原理进行了详细分析。最后实验验证了检测原理的正确性。文中所得结论对底火检测仪的工程化设计具有参考意义。60241

毕业论文关键词可装定底火检测仪电路设计引信

毕业设计说明书（论文）外文摘要

Title The Design of Setting Primer Detector

Abstract

Setting primer technology makes use of the time interval between the needle touching the primer and the projectile launched to achieve the information setting.This technology can overcome the insufficiency of the existing setting technology,and also implement new high explosive anti-tank cartridge reliable setting before launched.Determined in this paper, the setting primer system working principle is analyzed, improvement scheme of setting primer was introduced in detail, and the scheme is verified by the experiments.Through the analysis of experimental data primer detector design scheme is established.According to the design requirements of detecting performance for setting prime and to ensure the security of the testing process, the dual over-current protection circuit which based on software and hardware combined with is designed.And the whole detector circuit is designed based on this.Also the working principle of the circuit module are analyzed in detail.The experiment’s results verify the accuracy of detection principle at last. The conclusion in this paper has reference meaning to setting primer detector’s engineering design.

Keywords Setting primer Detector Circuit design Fuze

1.绪论 1

1.1研究背景概述 1

1.2现有装定技术发展概况 1

1.3底火装定技术国内外发展状况 3

1.4本文主要工作和结构 4

2.底火装定系统分析 6

2.1底火装定系统简介 6

2.2底火设计方案 6

2.3装定器设计原理方案 7

2.4引信专用模块设计 8

3.可装定底火改进方案及实验 9

3.1可装定底火改进基本思想 9

3.2可装定底火改进方案及实验结果 10

4检测仪电路设计 14

4.1检测仪设计原理 14

4.2电源调理电路 14

4.3过流过压保护电路 17

4.4电流检测电路 18

4.5单片机的选用 21

4.6液晶的选用 25

5.底火检测仪电流检测及其可靠度计算 29

结论 32

致谢可装定底火检测仪设计:http://www.751com.cn/jixie/lunwen_65654.html