菜单
  

    3.3.5 Correlating parts selector
    This selector provides the data of type and size related to the correlating parts. Therefore, when the system is used to design correlated holes, this selector would select the type and sizes related to parts according to the design criteria. The progressive die hole design system is pided into seven main plates and ten correlating parts, as shown in Fig. 13.
    3.3.6 Model generator
    The model generator can perform 3D hole modeling process and inserting relevant parts. It can be used to construct the solid model of correlated holes on corresponding plates according to the type, quantity, location, and size parameters of candidate library features by reading the excel files. Since the parameters or configurations of the holes are recognized automatically by the system rather than resulting from interactions with the user, the modeling process for hole is performed automatically. If there exists any error during the modeling processes, the design coordinator will then send an error message to the user presenting error command and circumstance.
    3.3.7 User interface
    The user interface is responsible for the communication between a designer and the system. The user interface of the proposed system comprises the selection of parameters and the assigned type of correlating parts. The user interface also is responsible for the detection of incorrect input data and the management of exceptional events.
    4 Illustrative example
    The developed system is explained with the design of a progressive die for the motor core for house appliance. First, the blank layout is drawn, and then the strip layout is designed which is inserted into the die assembly as a layout sketch. Then, a half standard die sets are inserted whose dimensions can be adjusted to the strip layout. The point sketch for the correlating parts outside strip layout area is also pre-established in template file. The point sketch can be edited by the user. Select such points to locate the parts such as screw, pin, stopper, guide post, and bushes. From the strip layout, the points or contours are selected to locate such parts as pilot pin assembly, lifter pin assemble, standard punches or dies, and other typical parameterized parts. When designing each of the correlating parts, the system first asks the type and/or size based on design criteria, and then the location is needed. The procedure is described in Fig. 14. In order to show the die structure clearly, the assembly drawing shown in Fig. 14d is dealt with upper die shoe and bottom die in transparent state and some parts in hidden state.
    5 Conclusion
    This paper studies the classification of holes on plates according to the structural type and relationship between correlating parts and correlated plates. A descriptive model is set up based on relevance. The paper presents a structural design system for holes on plates with relevance for 3D progressive dies built on a PC and integrating SolidWorks CAD system. The system can be used to design a series of holes automatically on main plates according to correlating parts selected by the user with the help of holes library feature. The correlating parts such as standard punch, die, guiding post and pushing, pilots, lifters, stopper, and other typical parameterized functional assembles or parts can be inserted on the assembly while the holes on plates are constructed. According to the design standard and criteria, the relationship between holes and correlating parts makes the edition process convenient and easy. Using the proposed system, holes can designed within 1 h, while in 3D CAD system, it will take about one working day to accomplish the same work. Thus, it can dramatically save time and costs and also provides excellent design quality for progressive dies. The proposed system is only applicable to holes design for the correlating parts which are standard or parameterized parts or assembles such as screws, pins, lifter assembles, standard punches, and dies now. How to utilize the method extensively to design of correlated holes on plates for nonstandard punches and dies which are variable with different product will be studied in the future.
  1. 上一篇:建筑节能投资决策英文文献和中文翻译
  2. 下一篇:模具热处理及其导向平行设计英文文献和中文翻译
  1. 冲压工艺规划和级进模设...

  2. 数控车床附件的研究英文文献和中文翻译

  3. 复杂级进模冲压件毛坯设...

  4. 旅客船运行时波浪形态的...

  5. 成形预测级进模冲压件多...

  6. 级进模确定弯曲顺序新方...

  7. 挖填方条件下锚板桩行为...

  8. 电站锅炉暖风器设计任务书

  9. 当代大学生慈善意识研究+文献综述

  10. 中考体育项目与体育教学合理结合的研究

  11. 河岸冲刷和泥沙淤积的监测国内外研究现状

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 十二层带中心支撑钢结构...

  14. 杂拟谷盗体内共生菌沃尔...

  15. 乳业同业并购式全产业链...

  16. 大众媒体对公共政策制定的影响

  17. java+mysql车辆管理系统的设计+源代码

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回