菜单
  

    another moving unit by the applied pressure, impact, and shearing or combine action on them. 
    They are available in various sizes and capacities ranging from 0.3 ton/hr to 50 ton/hr. They are
    classified based on different factors like product  size and mechanism used. Based on the
    mechanism used crushers are of three types namely Cone crusher, Jaw crusher and Impact
    crusher. 
     
    Fracture occurs in the feed material when the strain developed in it due to sufficiently applied
    impact forces, pressure or shearing effect exceeds  the elastic limit .Generally crushers are very
    rugged, massive and heavy in design.  The contact surfaces are equipped with replaceable liners
    made from high tensile manganese or other alloy steel sheet having either flat or corrugated
    surfaces. Shearing pins or nest in heavy coiled springs are provided in the crusher to guard against
    shock and over load.
     
    A crusher may be considered as primary, secondary or fine crusher depending on the size
    reduction factor. a)  Primary crusher – The raw material from mines is processed first in primary crushers..
    The input of such crushers is relatively wider and the output products are coarser in size.
    Example - Jaw crusher, Gyratory crusher.
    b)  Secondary crusher- The crushed rocks from primary crusher are sent to secondary crusher
    for further size reduction. Example - Cone crusher, reduction gyratory crusher, spring
    rolls, disk crushers etc.
    c)  Fine crushers- Fine crushers have relatively small openings, and are used to crush the feed
    material into more uniform and finer product. Example - Gravity stamp.
     
    The material to be crushed is dropped between two rigid pieces of metal, one of which then move
    inwards towards the rock, and the rock is crushed as it has a lower breaking point than the
    opposing metal piece. Jaw crusher movement is guided by pivoting one end of the swinging jaw.
    and an eccentric motion located at the opposite end. [4] The size of a jaw crusher is designated by
    the rectangular or square opening at the top of the jaws .For instance, a 22 x 30 jaw crusher has an
    opening of 22" by 30", a 46 x 46 jaw crusher has a opening of 46" square. Generally primary jaw
    crushers have the square opening design, and secondary jaw crushers have rectangular opening
    design. Jaw crushers are used as primary crushers in a mine or ore processing plant or the first
    step in the process of reducing rock. They follow “crush using compression” mechanism. 
     Abstract-Pro /工程师是一个参数化特征设计的3 d软件,用参数化建模功能。减少开发周期,提高设计质量,颚式破碎机,本文充分利用Pro / E的功能模块
    关键词-。颚式破碎机;机制;Pro /工程师模拟;运动学分析23569
    1.介绍
    颚式破碎机是一种重要的破碎设备生产加工,由于其结构简单、可靠、易于制造和文护、适应性等等。论文网而被广泛应用于各种矿石和散装材料的破碎工作在矿山、冶炼、建材、公路、铁路、水利和化工等行业。
  1. 上一篇:颚式破碎机外文文献和中文翻译
  2. 下一篇:滑动爬壁机器人英文文献和中文翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 低频振动的铁路车轴的状...

  4. 接头的形状对沥青塞接头...

  5. 电-气动驱动的垂直计算机...

  6. 开口端纺纱系统中的锥形...

  7. 木质填料聚丙烯复合材料...

  8. 乳业同业并购式全产业链...

  9. 大众媒体对公共政策制定的影响

  10. 十二层带中心支撑钢结构...

  11. 杂拟谷盗体内共生菌沃尔...

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 电站锅炉暖风器设计任务书

  14. java+mysql车辆管理系统的设计+源代码

  15. 河岸冲刷和泥沙淤积的监测国内外研究现状

  16. 中考体育项目与体育教学合理结合的研究

  17. 当代大学生慈善意识研究+文献综述

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回