菜单
  

        And rolling stock on the roll coolant distribution changes, the rack inlet side of the jet set of the new emulsion tubes and part of the installation of new cooling, so temperature can be precisely controlled. Coupled with the rolling schedule optimization, these methods reduce the required 50% of the work roll grinding, and significantly improve the strip shape, thickness tolerance and surface quality at the same time, greatly increase production.
        Two four roller cold rolling mill of a renovation project can bring about many improvements. These components are designed to produce the thickness of 0.05 mm to 0.25 mm, width 1630 mm to 1750 mm high quality strip. Reduced downtime and higher production increased rolling rate makes the same time, new control technology allows the thickness and flatness tolerances smaller. In addition, the dry strip exit side can improve the surface quality. These improvements is to be completed by the new strip thickness and flatness control technology, the new roll to adjust the hydraulic system, entrance side and exit side of the thickness measuring device, flatness measuring roller, a single nozzle to adjust the work roll cooling, with total exports of strip guide and guard purge system, transformed into a roller drive motor armature to improve efficiency (rolling speed increased to 1,100 m / min), a lateral displacement of the new work roll change car, and an automatic reel handling system.
    algroup the transformation of three foil rolling mill. algroup (Alusuisse Lonza Group) one of the members the United Kingdom Bridgnorth the Lawson Mardon Star Ltd. requires comprehensive transformation of its SMS three foil rolling mills. Plant lowest to 6μm (0.006 mm) of various thickness of aluminum foil.
    The project aims to improve the yield and quality through the equipment to adapt to growing market demand, related to the control system updates and rolling speed of the increase. After transformation, the mill installed a new winding machines, coil car and stand on the unloading, aluminum can withstand heavier volumes to rolling.
    Work roll and backup roll assembly and the inlet side of the transformation and export side of the new strip rolling guide and guard can improve the speed, especially in the middle and final stages. Flatness and thickness control is fully automatic.
     The first mill to complete the work of reform plans in December 2000, the second, three in 2001, respectively, 3 months and 6 months.
    Hydro Aluminium's new strip mill. March 1999, Norway's Hydro Aluminium Holmestrand gave SMS a key contract to provide for the rolled aluminum products on the new strip mill,
    The scope of supply includes, a Expanded SCR with SMS Backup Roll, complete, the new four high reversing cold rolling mill is not used for both new and existing mill air purification system, and the horizontal plate filter system. SMS process control and automation systems   for mill construction, shape and thickness control of the Levels1 and 2 are also part of the contract.
    Feed processing mill strip thickness of 1.2 mm to 50μm. Strip width is 800 to 1650 mm, coil weight is 10 tons. Maximum rolling speed is 1600 m / min. Roll size is 360 mm +870 mm diameter × 1800 mm roller body length. SCR Roll control is part of the process control system.
    Volume rolling plan in December 2000.
     Innovative steel mill
    AK Steel's carbon and stainless steel continuous tandem mill. In the past, ferrite and austenite stainless steel only in special, separate cold rolling machine rolling. Due to technological innovations, the most high quality carbon steel, ferritic and austenitic stainless steel can be a lot of production. Less than two years ago, the first continuous tandem cold rolling mill of stainless steel in the United States of AK Steel Rockport put into operation. Figure 13 shows the basic structure of this table mill.
    Some of the techniques used are:
        Carbon steel and stainless steel laser welding machine
  1. 上一篇:建筑结构构件桁架英文文献和中文翻译
  2. 下一篇:体外预应力钢筋混凝土梁的刚度英文文献
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 低频振动的铁路车轴的状...

  4. 接头的形状对沥青塞接头...

  5. 电-气动驱动的垂直计算机...

  6. 开口端纺纱系统中的锥形...

  7. 木质填料聚丙烯复合材料...

  8. 河岸冲刷和泥沙淤积的监测国内外研究现状

  9. 大众媒体对公共政策制定的影响

  10. 中考体育项目与体育教学合理结合的研究

  11. java+mysql车辆管理系统的设计+源代码

  12. 乳业同业并购式全产业链...

  13. 十二层带中心支撑钢结构...

  14. 杂拟谷盗体内共生菌沃尔...

  15. 电站锅炉暖风器设计任务书

  16. 当代大学生慈善意识研究+文献综述

  17. 酸性水汽提装置总汽提塔设计+CAD图纸

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回