菜单
  

    meshfree failure algorithm to simulate plugging failure formed by
    crack propagation during high-speed impact and contact. To do so,
    we have to address a number of technical issues: (1) Physically, the
    plugging fracture induced by high-speed impact is initiated by
    two-body or multi-body contacts. Although, the impact/contact
    algorithm has been well developed in finite element method, thereare still many pragmatic issues for the meshfree contact impact
    algorithm and its actual implementation. In this work, based on
    general philosophy of master/slave slide interface algorithm from
    finite element method, a master/slave contact algorithm is devel-
    oped to fit to meshfree computations. (2) During high-speed im-
    pact, a large amount of heat will generated nearby the failure
    area by plastic work accompanied by heat conduction; the ther-
    mal–mechanical coupling will cause thermal softening and mate-
    rial instability, which manifests as micro void formation and
    coalescence, subsequent macro material damage and fracture. To
    model such complex constitutive behaviors, we adopt the John-
    son–Cook model in constitutive modeling, and use a modified for-
    ward Euler one step time integration in constitutive update based
    on a tangent modulus method by Peirce et al. [25]. Although the
    Johnson–Cook model is a thermal-related model, the heat conduc-
    tion process is considered by many researchers. In this work, fully
    coupled thermal–mechanical equations of motion are considered
    with heat conduction, large scale yielding, and finite deformation.
    To ensure the numerical stability, an operator splitting algorithmis
    adopted to update thermal–mechanical constitutive and to inte-
    grate the weak form of heat conduction equation.
    The paper is organized into six sections: in Section 2, we shall
    present a complete meshfree Galerkin weak formulation, its inter-
    polation and constitutive update; in Section 3, we shall discuss the
    meshfree impact/contact algorithm, and in Section 4, we shall out-
    line a meshfree crack growth algorithm. The results of the plugging
    fracture simulation are presented in Section 5, and a few remarks
    are made in Section 6.The high-speed impact process will produce enormous plastic
    deformation, and in turn the material plastic flow will generate a
    large amount of heat at some local area. In some spatial points,
    the temperature can sharply increase up close to melting temper-
    ature. For instance, this may happen at the tip of Adiabatic Shear
    Band in less than 200 ls [36,37]. Therefore the effects of ther-
    mal–mechanical coupling and heat conduction cannot be ne-
    glected in high-speed impact simulations. In this work, a fully
    coupled thermal–mechanical impact problem with inelastic dam-
    age evolution is considered.
    By the virtual power principle, the weak formulation of balance
    of the linear momentum can be written as:
    where P denotes the nominal stress, which is the transpose of the
    first Piola–Kirchhoff stress, and it can be related to the Kirchhoff
    stress as s = PFT
    ; and CT
    0 denotes the traction boundary where the
    traction force T is prescribed. The above weak form formulation is
    obtained by integration by parts of the balance equation of linear
    momentums.
    Considering the heat generation and conduction process, the
    strong form of energy equation can be written as:
    where T is the temperature, v denotes the fraction of plastic work
    converting to heat, rX is the gradient operator in reference config-
    uration, Cp is specific heat. For isotropic heat conduction, the heat
    conductivity tensor K ¼ jI, where j is the conductivity coefficient.
    dp
    is the plastic rate of deformation.
  1. 上一篇:多支间歇精馏塔英文文献和翻译
  2. 下一篇:轧钢机英文文献和中文翻译
  1. 低燃油中的硫的氧化模型...

  2. 高速切削加工在模具制造...

  3. PCBN刀具高速切削加工英文文献和中文翻译

  4. 高速切削加工组合机床英文文献和中文翻译

  5. 煤炭冲击式破碎机英文文献和中文翻译

  6. 立轴冲击式破碎机英文文献和中文翻译

  7. 冲击式破碎机英文文献和中文翻译

  8. 杂拟谷盗体内共生菌沃尔...

  9. 电站锅炉暖风器设计任务书

  10. 十二层带中心支撑钢结构...

  11. 酸性水汽提装置总汽提塔设计+CAD图纸

  12. 大众媒体对公共政策制定的影响

  13. java+mysql车辆管理系统的设计+源代码

  14. 河岸冲刷和泥沙淤积的监测国内外研究现状

  15. 乳业同业并购式全产业链...

  16. 当代大学生慈善意识研究+文献综述

  17. 中考体育项目与体育教学合理结合的研究

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回