菜单
  

    Abstract   This is a combined design of type Ⅱ of parallel mechanism, which is used to realize arbitrary trajectories by the combination of cams mechanism. The combined cams mechanism and the method of using analysis to design it, and establishes cam’s mathematical expression through analysis method. Then can show the opposite moving relation between input component and output component, in order to design moving tracks and cam’s outline. Also designs system’s total flow chart. Illustrates arbitrary moving tracks’ combined organization’s program design and method, the result of program’s execution and so on through combine program and interface method.  uses animated imitation to test and verify the design’s result. The whole program’s process holds mechanical innovation as its foundation, it take the VB as a developing platform. Adopting module design to realize arbitrary trajectories, the design’s result achieves the desired results. 49543

    Keywords: Simulation technology,Parallel combination, Arbitrary trajectories,Cam mechanism,Mechanism Design

    Introduction 

      With the development of the mechanization and automation of the production processing. It is the higher demand of the characteristics of movement of bodies and power for output of the mechanism, but the single basic mechanism has some limitations, it can not meet certain performance requirements, more and more demanding requirements of movement trajectory of mechanism in the project, such as the control mechanism, compound feed mechanism etc. Because of the reasons of design, processing and installation etc. On many occasions, the equipment can not be fully realized designer’s intent, People have to adopt the approximate the trajectory. The demand for high precision, complex movement is getting more and more, with the continuously progress of machining capacity. Especially in the processing of some small and sophisticated components, this job will require very precise trajectory of the cutting tools. So there are the urgent requirements of the realization movement trajectory for the mechanism design. Therefore, it is urgent task of enhancement the mechanical innovation and accelerates the pace of innovation machinery to meet the needs of our daily processing for the machinery industry.

       The basic mechanism generally includes connecting  rod, cam, gear, intermittent, etc. Although these basic mechanisms are very broad for the application, but they all have also some limitations, for example. Linkage mechanism must be to solve the balancing problem for the high-speed running, some special law of motion with a single linkage is also difficult to achieve. The cam mechanism can receive the arbitrary law of motion, but the trip is not adjustable. The gear mechanism has good characteristics of movement and dynamic, but the mode of motion is simple. Ratchet mechanism, geneva Mechanism and other intermittent are not ideal characteristics of kinematic and dynamic, with the inevitable shock, vibration, and fluctuations in velocity and acceleration, etc. To solve these problems, the need for innovative design, full use of the good performance of the basic institutions, improve their bad characteristics. 

       The mechanism innovative is many ways, composition, evolution and variation, tectonic movement chain, and regeneration, etc. Which the combination theory can usually meet the requirements of trajectory, but also has good movement and dynamic characteristics, and make up for the shortcomings of a single mechanism. The mechanism characteristic can be more perfect, more perse forms of movement after combination.

    Combination mechanism 

       Combination mechanism can be pided into series connection, parallel, composite and stacking combination, etc. which parallel combination mechanism can constitute a new type with two or more parallel arrangement, composite combination mechanism can also constitute a new type with a two degrees of freedom and an additional by the method of parallel arrangement. Usually it can utilize the commonly method to realize motion trajectories, with combination of different types. 

  1. 上一篇:单片机介绍英文文献和中文翻译
  2. 下一篇:模糊逻辑的机械手智能力/位控制英文文献和中文翻译
  1. 预制板的连续组合双肋桥...

  2. 印刷用导电油墨和探索新...

  3. 高速切削加工组合机床英文文献和中文翻译

  4. 组合夹具系统的设计英文文献和中文翻译

  5. 凸轮机构的优化设计英文文献和中文翻译

  6. 电站锅炉暖风器设计任务书

  7. 大众媒体对公共政策制定的影响

  8. 十二层带中心支撑钢结构...

  9. 中考体育项目与体育教学合理结合的研究

  10. java+mysql车辆管理系统的设计+源代码

  11. 乳业同业并购式全产业链...

  12. 当代大学生慈善意识研究+文献综述

  13. 杂拟谷盗体内共生菌沃尔...

  14. 河岸冲刷和泥沙淤积的监测国内外研究现状

  15. 酸性水汽提装置总汽提塔设计+CAD图纸

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回