Acknowledgments
The financial support for this work from the Department of Science and Technology, Government of India,is gratefully acknowledged.The writer is thankful to Professor K. Rajagopal for his valuable comments and suggestions.
References
ASTM. (2001).“Standard test method for determining tensile properties
of geogrids by single or multi-rib tensile method.” D6637, ASTM Int.,
West Conshohocken, Pa., Vol. 04.13.
ASTM. (2006a). “Standard test methods for maximum index density and
unit weight of soils using a vibratory table.” D4253, ASTM Int., West
Conshohocken, Pa., Vol. 04.08.
ASTM.(2006b). “Standard test methods for minimum index density and
unit weight of soils and calculation of relative density.” D4254,
ASTM Int., West Conshohocken, Pa., Vol. 04.08.
Bathurst, R. J., and Jarrett, P. M. (1989). “Large scale model tests of geocomposite mattresses over peat subgrades.” Transp. Res. Rec.,1188, 28–36.
Buckingham, E. (1914).“On physically similar systems.”Phys. Rev., 4,345–376.
Bush, D. I., Jenner, C. G., and Bassett, R. H. (1990).“The design and
construction of geocell foundation mattress supporting embankments
over soft ground.”Geotext. Geomembr., 9, 83–98.
Carroll, R. G., Jr., and Curtis, V. C. (1990).“Geogrid connections.” Geotext.Geomembr., 9, 515–530.
Chummar, A. V. (1972).“Bearing capacity theory from experimental results.”J. Soil Mech. and Found. Div., 98, 1311–1324.
Dash, S. K., Krishnaswamy, N. R., and Rajagopal, K. (2001). “Bearing
capacity of strip footings supported on geocell-reinforced sand.” Geotext.Geomembr., 19, 235–256.
Dash, S. K., Reddy, P. D., and Raghukanth, S. T. G. (2008).“Subgrademodulus of geocell-reinforced sand foundation.” Proc., Institution ofCivil Engineers—Ground Improvement, 161, 79–87.
Dash, S. K., Sireesh, S., and Sitharam, T. G. (2003a).“Behaviour ofgeocell reinforced sand beds under circular footing.” Proc., Institution
of Civil Engineers—Ground Improvement, 7, 111–115.
Dash, S. K., Sireesh, S., and Sitharam, T. G. (2003b).“Model studies on circular footing supported on geocell reinforced sand underlain by
soft clay.” Geotext. Geomembr., 21, 197–219.Fragaszy, R. J., and Lawton, E. (1984). “Bearing capacity of reinforced
sand subgrades.” J. Geotech. Engrg., 110, 1500–1507.
Gibson, R. E. (1953). “Experimental determination of the true cohesion
and true angle of internal friction in clays.” Proc., 3rd Int. Conf. on
Soil Mechanics and Foundation Engineering, ISSMFE, Zurich, 1,126–130.
Langhaar, J. L. (1951). Dimensional analysis and theory of models,
Wiley, New York.
Mitchell, J. K., Kao, T. C., and Kavazanjiam, E., Jr. (1979). “Analysis of grid cell reinforced pavement bases.” Technical Rep. No. GL-79-8,
U.S. Army Waterways Experiment Station, Vicksburg, Miss.
Simac, M. R. (1990). “Connections for geogrid systems.” Geotext.
Geomembr., 9, 537–546.
Sireesh, S., Sitharam, T. G., and Dash, S. K. (2009). “Bearing capacity of circular footing on geocell-sand mattress overlying clay bed with
void.” Geotext. Geomembr., 27, 89–98.
Sitharam, T. G., Sireesh, S., and Dash, S. K. (2005).“Model studies of a circular footing supported on geocell-reinforced clay.” Can. Geotech. J., 42, 693–703.
Zhou, H., and Wen, X. (2008).“Model studies on geogrid- or geocellreinforced sand cushion on soft soil.”Geotext. Geomembr., 26, 231–238.