- 上一篇：高温换热器英文文献和中文翻译
- 下一篇：多件式模具设计英文文献和中文翻译
The probabilistic distribution and statistical parameters obtained from the literature survey and assumptions are shown in Table 2.
4.2. Limit state function for the flexure failure of main girders
The flexure limit state function is established by the girder’s ultimate resistance and external negative maximum moment as it is fitted by the response surface method. The random variables’ response function uses the Bucher–Bourgund method for the average of random variables and three axial points. The selected random variables are section area, inertia, and resistant moments of the girders (Table 3). Since the Bucher–Bourgund method is used, the three axial points had
the distance ±σ (standard deviation) between the center and axis points.
The statistical values of the selected random variables, which compose the response surface function, are provided in Table 4. The Pf of the limit state is calculated by the Rackwitz–Fiessler method [9], using probability distribution statistical parameters (Table 3). The reliability index is calculated for the load
A.S. Nowak, T. Cho / Journal of Constructional Steel Research 63 (2007) 1561–1569 1565
Table 4
Statistical values for the considered random variables
Cases Random variables P1 P2
x 1 x 2 x 3 Com1a
Com2b
Com1a
Com2b
CASE1 2.47E+06 3.54E+03 1.45E+07 101 080.48 104 970.76 62 184.37 71 754.91
CASE2 2.77E+06 3.54E+03 1.45E+07 102 600.37 106 540.27 62 066.54 71 627.52
CASE3 2.17E+06 3.54E+03 1.45E+07 98 723.84 102 533.47 62 321.67 71 903.62
CASE4 2.47E+06 3.97E+03 1.45E+07 101 093.19 104 988 63 309.96 72 996.61
CASE5 2.47E+06 3.12E+03 1.45E+07 101 076.15 104 960.92 60 857.94 70 290.55
CASE6 2.47E+06 3.54E+03 1.60E+07 101 166.68 105 069.1 62 872.11 72 464.1
CASE7 2.47E+06 3.54E+03 1.31E+07