菜单
　　
    摘要：本文利用高温固相法制备石榴石型Li7-x+yLa3Zr2-x-yTaxAlyO12电解质，并分别研究了锂的配比、铝的配比、钽的配比、第一次烧结温度、第二次烧结时间以及第二次烧结温度对制备的Li7-x+yLa3Zr2-x-yTaxAlyO12电解质的电导率的影响，Li7-x+yLa3Zr2-x-yTaxAlyO12电解质的制备的较佳工艺条件：钽的配比为0.5，铝的配比为0.1，锂过量10%，第一次烧结温度为900℃、第一次烧结时间为6小时、第二次烧结温度为1140℃、第二次烧结时间为20小时的时候，用电化学阻抗谱测电解质Li6.6La3Zr1.4Ta0.5Al0.1O12的电导率为9.43x10-4 S/cm。并用电子扫描电镜（SEM）以及X射线衍射仪（XRD）分别对Li7-x+yLa3Zr2-x-yTaxAlyO12电解质的形貌和结构进行表征， Li6.6La3Zr1.4Ta0.5Al0.1O12电解质微粒间隙小且分布均匀，还是立方晶相；30842
    创新点：用混合锂盐LiNO3和Li2CO3制备Li7-x+yLa3Zr2-x-yTaxAlyO12电解质还未见报道，且结果比结构相似的Li6.15La3Zr1.75Ta0.25Al0.2O12高2倍。
    毕业论文关键词： 高温固相法；氧化铝；五氧化二钽；电导率
    The Preparation of the Al and Ta doped Li7La3Zr2O12 Electrolyte
    Abstract: In this article, a garnet-type Li7La3Zr2O12 electrolyte was prepared using high-temperature solid-phase method by Al and Ta doping. The effects of molar ratios of Li, Al, Ta , as well as the second sintering time, and the first and the second sintering temperature on the conductivity of the resultant sample of Li7-x+yLa3Zr2-x-yTaxAlyO12 electrolyte was investigated. From these results, the optimized technical conditions for the preparation of the electrolyte turned out to be the following: The ratio of Ta and Al is 0.5 and 0.1, respectively, with the first sintering temperature/time, and the second sintering temperature/time being 900ºC/6h, and 1140ºC/20h, respectively, along with a 10% excess of  lithium. The conductivity of the resultant product, Li6.6La3Zr1.4Ta0.5Al0.1O12,was determined to be 9.4310-4 S/cm. Scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) were used to characterize the morphology and structure of the electrolyte, respectively, indicating the sample of Li6.6La3Zr1.4Ta0.5Al0.1O12 electrolyte is comprised of uniformly sized particles with a small interstitial space in its cubic lattice phase.
    The Innovative points of this study are: Using both LiNO3 and Li2CO3 as lithium source to prepare Li7La3Zr2O12 electrolyte has not been reported, and the the conductivity of the prepared electrolyte was found to be 2 times higher than that of a similar structure . Li6.15La3Zr1.75Ta0.25Al0.2O12.
    Key Words:high-temperature solid-phase method；aluminum oxide ;tantalic oxide;conductivity
    目录
    1 前言    1
    1.1 锂离子电池简介及电池的发展    1
    1.1.1 锂离子电池的工作原理    1
    1.1.2 锂离子电池的优点[5]    1
    1.1.3 电池的发展及发展方向    2
    1.2 固体电解质种类及研究现状    2
    1.2.1 聚合物电解质    2
    1.2.2 LiPON电解质    3
    1.2.3 NASICON类型电解质    3
    1.2.4 钙钛矿型电解质    3
    1.2.5 硫化物电解质    3
    1.2.6 石榴石晶体类电解质    4
    1.3 论文研究方法-高温固相合成法    4
    1.3.1 高温固相法简介    4
    1.3.2 助磨剂    5
    1.4 论文研究内容和意义    5
    1.4.1 论文研究的内容    5
    1.4.2 论文研究的意义    5
    2 实验部分    7
    2.1 仪器与试剂    7
    2.1.1 实验仪器    7
    2.1.2 实验试剂    7
    2.2 铝钽掺杂锆酸镧电解质的制备    8
  1. 上一篇：1,4-二氢吡啶类化合物的合成研究
  2. 下一篇：分光光度法食品及饮水中铝含量的分析研究

  1. 过渡金属掺杂SBA的制备工艺研究

  2. Cu掺杂对Mn-Co尖晶石型化合...

  3. 水热法制备氮掺杂石墨烯-片状Co(OH)2复合材料

  4. 溶剂热法制备氮掺杂石墨烯-Cu纳米复合材料

  5. 氮掺杂石墨烯—Ni(OH)2复合...

  6. 钾掺杂石墨烯对污水中亚...

  7. 掺杂二氧化钛辐射吸收特性分析

  8. 酸性水汽提装置总汽提塔设计+CAD图纸

  9. 河岸冲刷和泥沙淤积的监测国内外研究现状

  10. 电站锅炉暖风器设计任务书

  11. 当代大学生慈善意识研究+文献综述

  12. 杂拟谷盗体内共生菌沃尔...

  13. 中考体育项目与体育教学合理结合的研究

  14. 乳业同业并购式全产业链...

  15. 大众媒体对公共政策制定的影响

  16. java+mysql车辆管理系统的设计+源代码

  17. 十二层带中心支撑钢结构...

　　

About

751论文网手机版...

主页：http://www.751com.cn

关闭返回