摘要： 随着我国经济全球化的推进，各地区经济往来愈加频繁，在这条件下高速铁路得到了快速发展。铁路通信系统就是保障列车效率与安全的重要组成部分。应答器作为ATP的关键组件，用于在特定的地点实现高速列车——地之间的数据传输，为列车提供ATP所需要的各种点式信息，确保列车在高速运行状态下的安全。本课题是设计一个基于单片机的车载应答器，选择的无线设备是点对点的传输方式，以无线发射和接收设备，通过发射端的信号发射和天线接收端的接收来进行模拟。以PIC16F690单片机和CC1100无线收发芯片，组成一套简易的收发系统。从电脑串口中输出数据信号，由PIC16F690单片机对信号的调制处理，再通过CC1100芯片，经天线，将信号发射给接收端，接收端收到信号后，再进行动作和反馈，达到无线收发设备发送、接收信号的过程，以此来达到模拟车载应答器的工作。20163
关键词： 射频技术；应答器；单片机；列车；CC1100
Design of vehicle transponder based on single chip microcomputer
Abstract: With the promotion of our country's economic globalization, the economy of different regions communicate a lot, and the high-speed railway enjoys a rapid development. Railway communicating system is the key part of guarantying efficiency and security. Balise is the key component of ATP which is being used to realize the data transfer between different high-way stations and to provide various information points for the trains to ensure the safety of train running at a high speed. This topic is to design a microcontroller-based automotive balise. The wireless device I have chosen is point-to-point way which can realize the stimulation through the signal emission from the transmitter and signal receiving form antenna receiver. Transmit the chip through microcontroller PIC16F690 and wireless transceiver CC1100 which consists of a simple transceiver system. Export the data from the computer, and then process the signal through the microcontroller PIC16F690, next transmit the signal to the receiving end via the antenna through the chip CC1100, and then process the action and feedback to realize the whole process and to achieve the stimulation of working as vehicle balise.
KeyWords: RFID; Balies; SCM; Train;CC1100
目录
1 绪论 1
1.1 发展现状 3
1.1.1 国外发展状况 3
1.1.2 国内发展状况 4
1.1.3 发展趋势 4
1.2 课题基本内容 5
2 无线数据传输原理概述 7
2.1 无线数据传输编码原理 8
2.2 无线数据传输信号的解码 10
2.3 无线数据传输协议 11
2.4 无线数据传输系统的调制和解调 11
3 硬件设计 12
3.1 CC1100 12
3.1.1 电路结构 13
3.1.2 4线串行配置数据接口 13
3.2 单片机选择 14
3.2.1 51单片机的特点 14
3.2.2 PIC单片机的特点 15
3.3 PIC16F690 16
3.3.1 引脚及说明 16
3.3.2 工作模块 17
3.4 硬件系统设计 19
3.4.1 控制器电路 19
3.4.2 无线数据收发模块电路 19
3.4.3 电源模块 20
3.4.4 电平输出模块 20
4 软件设计 22
4.1 电路图绘制软件PROTEL DXP 22
4.2 串口通信控制器 23
4.3 主程序流程图 24 PIC16F690单片机的车载应答器设计+电路图:http://www.751com.cn/zidonghua/lunwen_11829.html