摘要：随着宽带网络和嵌入式技术在社会的普及和进步， 人们已能广泛的接受利用网络实现远程监控，嵌入式网络监控技术就是在这个条件下渐渐成长起来的。本系统就采用MCU(S3C2440)作主控器件，单片机应用系统是有硬件和软件组成的。硬件由单片机扩展存储器、输入/出设备和各种实现单片机系统控制的要求接口电路以及有关的外围电路芯片或者部件组成；而软件是由单片机应用系统实现它特定的控制功能的各种工作程序以及管理程序组成的。在单片机应用系统的开发过程中，应不断的调整软、硬件，协调地的进行软、硬件的设计，来提高工作效率，当系统的硬件和软件紧密配合并协调一致时，就能够组成高性能单片机应用系统。本设计完成了单片机的应用系统及其开发过程系统的总体设计、硬件设计和软件设计以及系统调试，根据开发实际需要，而相互协调、交叉、有序的进行。56570
毕业论文关键词：嵌入式，智能，监控，web服务器
Abstract：With the development of embedded technology and high-speed broadband networks, using remote monitoring network has been widely accepted, of embedded network monitoring technology is evolving in this condition, mature up. The system uses the MCU (S3C2440) as the master device, SCM application system consists of hardware and software. Extended by a single chip hardware memory, input / output devices and a variety of requirements to achieve single chip system control interface circuit and the external circuit chips or components; software by the microcomputer application system to achieve its specific control of various work processes and management procedures composition. In the MCU application development process, should continue to adjust the software and hardware, and coordinated software and hardware designed to improve efficiency, when the system closely with hardware and software, and coordinated, can form high-performance microcontroller applications. The subject completed the Application System the development process of system design, hardware design, software design and system debugging, according to the actual needs of the development, coordination, cross, organic conduct.
Keywords：Embedded， Intelligent，Monitoring，Web server
目 录
1. 前言 4
1.1 课题背景 4
1.2 智能家居系统的概述 4
1.3 方案研究目的和意义 5
1.4 系统设计的主要任务 5
2. 方案设计 6
2.1 系统方案论证 6
2.2 系统总体的设计和分析 6
2.3 系统框图 6
3. 硬件电路的设计 7
3.1 CPU-S3C2440的介绍 7
3.2 SHT10温湿度传感器 8
4. 系统制作和调试 8
4.1 系统硬件的调试 8
4.2 软件和联机的调试 9
4.2.1 主控程序的调试 9
4.2.2 远程控制的调试 9
附录A CGI程序 13
附录B 发送和接收短信程序 22
附录C 远程控制开发板程序 28
结论 29
参考文献 智能家居方案对象控制部分设计:http://www.751com.cn/zidonghua/lunwen_61098.html