STC89C52单片机开关电源设计+程序

摘要分析破片飞行规律和研究战斗部威力效应的关键在于破片速度和其速度分布规律的研究。随着时代的进步,现代武器系统对战斗部的破片速度指标和对破片速度测量精度的要求越来越高。目前国内还没有相关标准速度源和标准速度定值系统,这增加了校准测速系统的困难。68318

高精度测时仪在设计时,采用了脉冲计数法和量化延时法,不但保证了测量精度而且扩展了量程。系统采用STC89C52单片机和DS1302芯片,设计了高精度测时仪, ,在实验过程中,经过对测时仪精度的考核,使测时仪测量精度达到1us。

处理实弹射击的数据并对“标准”速度监测系统进行考核。实验结果显示,系统能够满足无偏、一致和有效性,并且系统的不确定度不低于0.1%。通过“标准”速度监测系统去校准测速系统是可以满足量值传递要求的。

毕业论文关键词破片速度测速系统高精度测时仪不确定度

毕业设计说明书（论文）外文摘要

Title Precision analog school inspection device

Abstract

Analysis of key fragments flight rules and warhead research is to study the effects of fragmentation rate and its velocity distribution law. With the progress of time, modern weapons systems fragmentation warhead fragments speed indicators and speed measurement accuracy of the increasingly high demand. Currently, there are no standard speed setpoint source and standard speed system, which increases the difficulty of calibrating speed system.

When high-precision measurement instrument designed, using a pulse counting method and quantified delay law, not only to ensure the accuracy and extended range. System uses STC89C52 microcontroller and DS1302 chip designed high-precision chronometer, during the experiment, after the accuracy of the assessment when measuring instrument, measuring instrument when making measurement accuracy 1us.

Data handling and firing of the "standard" speed monitoring system assessment. Experimental results show that the system can meet unbiased, consistent and effective, and the uncertainty of the system is not less than 0.1%. By "standard" speed monitoring system to calibrate speed value transfer system is to meet the requirements.

Keywords Fragment velocity,Calibration system，high precision

time-measuring instrument,Uncertainty

1 绪论 1

1.1 课题背景 1

1.2 校准方法 1

1.3 本文主要工作 2

2 高精度模拟校检系统设计 2

2.1 设计指标 2

2.2 系统构成 3

2.3 选型 3

3 高精度模拟校检器制作 7

3.1 高精度模拟校检器研制方案 7

3.2 高精度模拟校检器成品 8

3.3 三极管 10

3.4 旋转编码开关 11

4 脉宽调制实验 13

5 软件部分 14

5.1 下位机程序 15

5.2 上位机程序 15 STC89C52单片机开关电源设计+程序:http://www.751com.cn/zidonghua/lunwen_76828.html