摘要:  本设计课题名称为：高雅染色釜的设计，课题内容包括1染色釜的设计2染料罐的设计3管道及布液管的设计。原始数据及数据为：设备内最高工作压力为35MPa，设备内工作温度为22℃~120℃。染色釜的设计压力为42MPa，设计温度为140℃。筒体内径Di=170mm，筒体长度L=2m。超临界二氧化碳染色釜的介质：二氧化碳；设计严格按照国家标准进行，压力容器必须符合GB150 标准的钢制压力容器和压力容器必须符合NB / T47003.1-2009焊接钢制压力容器标准。47343
高压染色釜，制造和使用技术性强，要求非常严格，涉及提取工艺，结构设计，材料选用，高压机械密封，生产，安全和温度，压力，液位，流量，含综合交叉设置的氧气浓度的设计和其他相关参数测量计链分布式控制等多个学科，它是一个高科技设备。对于高压釜的普遍理解，便是根据按照相关的技术标准同所需的要求不同的工艺条件需求的结构设计，以及其参数配置设计条件，程序，测试和制造。
毕业论文关键词： 高压；染色釜；罐；压力容器
Pressure dyeing autoclave design
Abstract:  The name of the design issues: elegant stained kettle design topics including dyeing autoclave 1 Design 2 Design 3 dye tank pipes and cloth tube design. Raw data and data: maximum working pressure within the apparatus 35MPa, operating temperature of the device within 22 ℃ ~ 120 ℃. Dyeing autoclave design pressure of 42MPa, the design temperature of 140 ℃. Cylinder inner diameter Di = 170mm, cylinder length L = 2m. Supercritical carbon dioxide dyeing autoclave media: carbon dioxide; designed in strict accordance with national standards for pressure vessels must comply with the GB150 standard steel pressure vessel and pressure vessels must comply with the NB / T47003.1-2009 welded steel pressure vessel standards.
Pressure dyeing autoclave, manufacture and use of highly technical, very demanding, involving the extraction process, structural design, material selection, high pressure mechanical seal, production, safety, and temperature, pressure, level, flow, concentration of oxygen-containing integrated cross set design and other relevant parameters to measure multiple disciplines meter chain distributed control, it is a high-tech equipment. For the general understanding of the autoclave, the structural design is based on the same technical standards in accordance with the relevant requirements needed for different process conditions demand, as well as its design parameters conditions, procedures, testing and manufacturing.
Key words:  high pressure ;dyeing autoclave tank; pressure vessel
 目录
1课题综述    1
1.1  课题介绍    1
1.2课题研究的意义    1
2高压染色釜的设计    6
2.1原始条件及数据    6
2.2技术要求    6
2.3高压染色釜相关设计计算    6
2.3.1筒体设计    6
2.3.2封头    7
2.3.3螺纹法兰    10
2.3.4平盖的设计    11
2.3.6筒体端部法兰的设计计算    11
2.3.7校核    12
2.3.8开孔及开孔补强    13
3 染料罐的设计及相关计算    15
3.1设计依据    15
3.2设计参数要求    15
3.3设计参数的确定    15
3.4筒体厚度的计算    16
3.5平盖的设计    16
3.6卡箍    17
3.7法兰    18
3.8法兰上螺栓和螺母    19
3.9开孔及开孔补强    21
3.10校核    21
4 附件    23
4.1染色釜部分附件    23 高压染色釜设计+CAD图纸:http://www.751com.cn/huaxue/lunwen_49274.html