菜单
  

    摘要本实验采用微波溶剂热法,低温、快速(200℃,20min)合成LiCo0.5Fe0.5PO4,同时结合喷雾裂解法对其进行碳包覆,获得LiCo0.5Fe0.5PO4/C,从而提高材料的导电性和循环稳定性。LiCoPO4具有橄榄石结构,工作电压平台可高达4.8V,有望成为下一代高电压、高能量密度的动力锂离子电池正极材料。但是材料本身存在着电子电导率和锂离子扩散系数极低的缺点,导致其电化学性能较差。本文首先研究了LiOH浓度和不同碳包覆比例对LiCo0.5Fe0.5PO4晶体生长的影响,并进一步研究了LiCo0.5Fe0.5PO4/20%C进行金属元素取代形成LiCo0.5Fe0.49M0.01PO4(M=Zn、Ni、Cr、Mg或Mn)对物相结构、电化学性能及锂离子扩散系数的影响。结果表明:反应最佳n(Li):n(P)比为3:1,碳包覆比例为20%,同时Zn取代可以明显提高LiCo1-xFexPO4/C的比容量、库伦效率、循环寿命和锂离子扩散系数。47067

    毕业论文关键词: 正极材料;LiCo0.5Fe0.5PO4;微波溶剂热法;喷雾裂解法;电化学性能 

    Abstract

    In this study, using the method of microwave assisted heating, Synthesis LiCo0.5Fe0.5PO4 fast (200 ℃, 20min) at low temperature,combined with Spray pyrolysis method to coat it with carbon, to get LiCo0.5Fe0.5PO4 ,so as to enhancing the conductivity and cycling stability of the material. LiCoPO4 with olivine structure,are considered to be the promising next generation of power lithium ion battery cathode material for higher potential(4.8V)and energy density than that of LiFePO4.However,their poor electrochemical performances attributed to their extremely low electronic conductivity and Li+ diffusion coefficient limit the commercialization.In this study, LiCo0.5Fe0.5PO4 cathode materials were synthesized by microwave solvothermal method. The influence of concentration of  LiOH and the carbon content on the crystal structure, electrochemical properties, Li+ diffusion coefficient of  LiCo1-xFexPO4/C (0≤x≤0.5) have been investigated The results indicated that n(Li):n(P)=3:1,the carbon content is 20% Electrochemicaltests showed that Zn substitution could significantly increase the initial specific capacity,coulombic efficiency,cycle performance and rate capability which attributed to the enhanced of Li+ diffusions. LiCo0.5Fe0.49Zn0.01PO4/C exhibited the highest reversible specific discharge energy.

    KeyWords: Cathode Material; LiCo0.5Fe0.5PO4; Microwave solvothermal; spray pyrolysis method; Electrochemical performance

    目     录

    1 绪论 1

    1.1 锂离子电池发展现状 1

    1.1.1 课题研究背景及意义 1

    1.1.2 锂离子电池的主要结构及工作原理 2

    1.2 锂离子电池正极材料的研究概述 3

    1.2.1 层状正极材料LiCoO2性能及特点 3

    1.2.2 层状正极材料LiNiO2性能及特点 3

    1.2.3 尖晶石型正极材料LiMn2O4性能及特点 3

    1.2.4 正极材料Li3V2(PO4)3(LVP)性能及特点 3

    1.2.5 橄榄石型正极材料LiMnPO4性能及特点 3

    1.2.6 橄榄石型正极材料LiFePO4性能及特点 4

    1.2.7

  1. 上一篇:纳米碳材料改性室温硫化硅橡胶的性能研究
  2. 下一篇:逆转变奥氏体对17-4PH不锈钢组织和力学性能的影响
  1. 纳米二氧化锰的低温水热法合成表征及其性能

  2. 混合溶剂热法制备Bi2MoO6纳...

  3. 倾斜溅射调控软磁金属薄...

  4. 简单水热法制备超级电容器用的电极材料

  5. 溶剂热法制备纳米四氧化...

  6. 微波溶剂热法制备高性能...

  7. 水热法合成无稀土永磁材料研究

  8. 大众媒体对公共政策制定的影响

  9. 中考体育项目与体育教学合理结合的研究

  10. 杂拟谷盗体内共生菌沃尔...

  11. 十二层带中心支撑钢结构...

  12. java+mysql车辆管理系统的设计+源代码

  13. 酸性水汽提装置总汽提塔设计+CAD图纸

  14. 河岸冲刷和泥沙淤积的监测国内外研究现状

  15. 乳业同业并购式全产业链...

  16. 当代大学生慈善意识研究+文献综述

  17. 电站锅炉暖风器设计任务书

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回