- 上一篇：LY12高强铝合金摩擦螺柱焊接工艺试验研究
- 下一篇：7A52铝合金激光+MIG复合焊接工艺研究
摘要本课题的目的在于采用双目视觉测量技术进行锻件在线形态尺寸非接触测量，采集锻件在锻造过程高温状态下的图片，通过对采集到的图像进行分析和计算，得到锻件的三维尺寸。
建立锻件热成型过程形态尺寸的视觉传感测量试验系统总体结构；基于透镜变换矩阵的传统标定方法，制作标定块，选择合适摄像头，选取合适波长范围的滤光片，开展模拟试验。选取一块钢板、加热至300℃，分别采集100℃、200℃、300℃下钢板的轮廓图像，对采集的图像进行特征提取，根据标定原理算出钢板尺寸，得出相对误差并分析原因。选取一块铝合金板、加热至300℃，分别采集100℃、200℃、300℃下铝合金板的轮廓图像，对采集的图像进行特征提取，根据标定原理算出钢板尺寸，得出相对误差并分析原因。67687
通过研究图像信号的获取、图像优化、边缘提取，结合摄像机标定方法，设计出测量锻件尺寸的系统。
毕业论文关键词 双目视觉 锻件 非接触测量 标定 滤光片
毕业设计说明书（论文）外文摘要
Title Technology of measuring wind power spindle thermo forming visual
Abstract
The purpose of this paper is to do non-contact measurement of wind power main shaft thermal molding process by using binocular vision measurement, collecting the pictures from forgings forging process under high temperature, using some software to do analysis and calculations and the three-dimensional size forgings to judge if it meets the requirements of process documents, and lay the foundation of intelligent control quality forgings thermo forming.
Shape forging process to establish the size of thermoforming visual sensing measurement test system architecture; lens transformation matrix based on traditional calibration methods, producting calibration block, choose the right camera, to carry out simulation tests. Select a steel plate heated to 300 ℃, respectively collecting the plate contour image under100 ℃, 200 ℃, 300 ℃ , doing the collected image feature extraction, calculating the plate size according to the principle of the calibration draw and analyze the reasons for the relative error. Select a aluminum alloy plate heated to 300 ℃, respectively collecting the aluminum alloy plate contour image under100 ℃, 200 ℃, 300 ℃ , doing the collected image feature extraction, calculating the plate size according to the principle of the calibration draw and analyze the reasons for the relative error.
By studying the image signal acquisition, image optimization, edge extraction, with camera calibration method to design the size of the measurement system forging.
Keywords binocular vision, forgings, non-contact measurement, calibration
目次
1 绪论 1
1.1 课题研究背景 1
1.3 双目视觉测量方法 4
1.4 课题主要研究内容 8
2 大尺寸锻件双目视觉测量系统的建立及标定试验 8
2.1 大尺寸锻件双目视觉测量系统结构建立 8
2.2 大尺寸锻件双目视觉测量系统的搭建 9
2.3 大尺寸锻件双目视觉测量系统标定方法的确定 10
3 大尺寸锻件双目视觉测量系统模拟试验 17
-
ADS的SIMP系列耐热钢组织结...
-
DZ4125镍基高温合金衬垫结...
-
45钢螺柱-钢板结构摩擦复合热源螺柱焊接研究
-
42CrMo典型风电主轴材料的等温正火工艺研究
-
ANSYS钢铁零件淬火热力学耦合有限元分析
-
DEFORM大型风电主轴锻件锻...
-
高强铝合金螺柱感应+拉弧...
乳业同业并购式全产业链...
电站锅炉暖风器设计任务书
十二层带中心支撑钢结构...
酸性水汽提装置总汽提塔设计+CAD图纸
java+mysql车辆管理系统的设计+源代码
大众媒体对公共政策制定的影响
中考体育项目与体育教学合理结合的研究
杂拟谷盗体内共生菌沃尔...
河岸冲刷和泥沙淤积的监测国内外研究现状
当代大学生慈善意识研究+文献综述