菜单
  
    Abstract:This work applies modular design concepts to designating beverage-container injection molds. This study aims to develop a method of controlling costs and time in relation to mold development, and also to improve product design. This investigation comprises two parts: functionality coding, and establishing a standard operation procedure, specifically designed for beverage-container injection mold design and manufacturing. First, the injection mold is pided into several modules, each with a specific function. Each module is further pided into several structural units possessing sub-function or sub-sub-function. Next, dimensions and specifications of each unit are standardized and a  compatible interface is constructed linking relevant units.This work employs a cup-shaped beverage container to experimentally assess the performance of the modular design approach. The experimental results indicate that the modular design approach to manufacturing injection 21929
    molds shortens development time by 36% and reduces costs by 19∼23% compared with the conventional approach.Meanwhile, the information on modularity helps designers in perse products design. Additionally, the
    functionality code helps effectively manage and maintain products and molds.
    1 Introduction
        Injection Recently, growing market competition and increasingly
    perse customer demand has forced competitors to increase the speed at which they deliver new products to the market. However, developing a mold for mass production requires considering numerous factors, including
    product geometry, dimensions, and accuracy, leading to long product development time. Introducing modular design concepts into product design appears a key mean of facilitating product development, since it increases
    design flexibility and shortens delivery time [1–4]. Meanwhile, a high level of product modularity enhances product innovativeness, flexibility, and customer services [5].Modularity is to subpide a complex product into modules that can be independently created and then are easily used interchangeably [6, 7]. There are three general fields where modularity could be implemented including modularity in design (MID), modularity in use (MIU), and modularity in production (MIP) [8]. MID involves standardizing basic structural units which perform specific functions, thus facilitating flexible assembly of various products [9, 10]. MID can reveal product structure, namely the relationship among different products. Related products are termed product family and include both basic and specific functions. Developing product families offers
    benefits in terms of multi-purpose design and thus reduces production costs [11, 12]. MIU is consumer-driven decomposition of a product with a view to satisfying the ease of use and inpidually. MIP enables the factory floor to precombine a large number of components into modules and
    these modules to be assembled off-line and then brought onto the main assembly line to be incorporated into a small and simple series of tasks.
    MID has been broadly applied to numerous areas and has exerted significant effects in terms of cost reduction and design persity [13, 14]. However, there is limited empirical research that has applied modular design to
    molds [15–18]. This study thus aims to reduce mold development time by applying modular design and develop a standard operation procedure for designing beveragecontainer injection molds, which are characterized by
    scores or even hundreds of components.
    2 General procedures of designing injection molds
    Basically, an injection mold set consists of two primary components, the female mold and the male mold. The molten plastic enters the cavity through a sprue in the female mold. The sprue directs the molten plastic flowing
    through runners and entering gates and into the cavity geometry to form the desired part. Sides of the part that appear parallel with the direction of the mold opening are typically angled slightly to ease rejection of the part from the mold. The draft angle required for mold release is
  1. 上一篇:金属半球壳破碎的计算英文文献和中文翻译
  2. 下一篇:多腔注塑模具英文文献和中文翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. 河岸冲刷和泥沙淤积的监测国内外研究现状

  9. 十二层带中心支撑钢结构...

  10. 中考体育项目与体育教学合理结合的研究

  11. 杂拟谷盗体内共生菌沃尔...

  12. 大众媒体对公共政策制定的影响

  13. 电站锅炉暖风器设计任务书

  14. 乳业同业并购式全产业链...

  15. java+mysql车辆管理系统的设计+源代码

  16. 当代大学生慈善意识研究+文献综述

  17. 酸性水汽提装置总汽提塔设计+CAD图纸

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回