One area in injection mould design, which hasreceived little attention, is the design of cavity layout in a multiple cavity injection mould. Cavity layout design affects the whole process of injection moulding directly, since it is one of the most important phases in mould design process. Consideration of cavity layout design in injection mould at concept design stage will improve the quality of injection moulded products because it is associated with the determination of many key factors affecting the design and quality of mould. Such factors include number of cavities; parting line; type of mould; type and position of gate; runner system; cooling system and ejection system. Some of these factors are difficult to build as true mathematical models for analysis and design.
This paper presents the development of a design support system, called Intelligent Cavity Layout Design System (ICLDS), for multiple-cavity injection moulds based on knowledge based and object oriented approaches. It uses the case-based and ruled-based reasoning in arriving at the layout solution [14]. It is based on the commercial software system named “RETE++”, which is an integrated development platform for customers to develop their own knowledge-based systems [15]. The objective is to make full use of available techniques in artificial intelligence in assisting mould designers at concept design stage.
2. Cavity Layout Design in Injection Moulds
Current practice for injection mould design, especially cavity layout design, depends largely on designers’ experiences and knowledge. It would therefore be desirable to use knowledge engineering, artificial intelligence and intelligent design techniques in generating an acceptable cavity layout design in injection mould accurately and efficiently. In mould design, most of patterns of cavity layout and rules and principles of cavity layout design can also be easily represented in the form of knowledge, which can be used in most of knowledge-based design systems.
For example, for the layout patterns shown in Fig. 1, the criteria to select the suitable layout pattern for design are mainly dependent on working environments, conditions and requirements of customer and are mainly based on designer’s skill and experience. To make a choice of contradictory factors will rely obviously on designer’s knowledge and experiences. It is rather suitable for intelligent design techniques to be used in systems designed for such situations, especially for routine or innovation design.
Design of injection mould mainly involves consideration of design of the following elements or sub-systems:
(1) mould type
(2) number of cavities
(3) cavity layout
(4) runner system
(5) ejector system
(6) cooling system
(7) venting
(8) mounting mechanism
Most of the elements are inter-dependent such that itis virtually impossible to produce a meaningful flowchart covering the whole mould design process. Someof the design activities form a complicated design network as shown in Fig. 2.Obviously, in injection mould design, it is difficult for designer to monitor all design parameters. Cavity design and layout directly affects most of other activities.
The application of advanced knowledge based techniques to assist designer in cavity layout design at concept design stage will greatly assist in the development of a comprehensive computer-aided injection mould design and manufacturing system. It is noted from Fig. 1 that a number of different layout patterns are possible with multiple cavities inside a mould. Higher the number of cavities of mould, higher the productivity of the injection mould. But this may lead to difficulties with issues such as balancing the runners or products with the complicated cavity shapes, which in turn may lead to problems of mould manufacturability. It is also possible that the number of cavities and the pattern of cavity layout will influence the determination of parting line, type of gate, position of gate, runner system and cooling system. Most of the main activities of mould design are therefore linked to cavity layout design. Fig. 3 shows the relations between cavity layout design and other design activities. The cavity layout design problem therefore depends upon a number of functionalities of the overall mould design system, which includes:
- 上一篇:注塑模具英文文献及中文翻译
- 下一篇:注塑模有效冷却系统英文文献和中文翻译
-
-
-
-
-
-
-
电站锅炉暖风器设计任务书
大众媒体对公共政策制定的影响
java+mysql车辆管理系统的设计+源代码
中考体育项目与体育教学合理结合的研究
酸性水汽提装置总汽提塔设计+CAD图纸
河岸冲刷和泥沙淤积的监测国内外研究现状
当代大学生慈善意识研究+文献综述
杂拟谷盗体内共生菌沃尔...
乳业同业并购式全产业链...
十二层带中心支撑钢结构...