菜单
  
    abstract This paper presents the characterization and the pre-dimensioning of an adsorption chiller as part of
    a 20 kW air conditioning central unit for cooling a set of rooms that comprises an area of 110 m2
    . The system is basically made up of a cold water storage tank supplied by an activated carbonemethanol
    adsorption chiller, a hot water storage tank, fed by solar energy and natural gas, and a fan-coil. During an
    acclimatization of 8 h (9e17 h), the following parameters were obtained for dimensioning the cooling
    system: 504 kg of activated carbon, 180 L of methanol, 7000 L of hot water, 10,300 L of cold water with its
    temperature varying in the fan-coil from 1 Cto14 C. Considering the mean value of the total daily
    irradiation in João Pessoa (7 and a cover of regenerating heat supplied by solar energy 5029
    equivalent to 70%, the adsorption chiller’s expected coefficient of performance (COP) was found to be
    around 0.6. 2010 Elsevier Ltd. All rights reserved.1. Introduction
    Solar cooling is an interesting application of solar energy because,
    the stranger the insolation, the greater needs for cooling. As a rule,
    the systems requiring thermal energy as theirmain power input for
    the production of frigorific effect are most dependable on sorption
    processes. The use of solar energy for cooling applicationsea device
    based on the liquid sorption cycle e was reported more than forty
    years ago by Chinnappa [1].
    The energy needed for a sorption cooling system is essentially
    thermal, and may come from different sources, such as: process
    heat, residual vapor or solar energy. One of the main advantages of
    such a system in relation to the conventional vapor compression
    system lies on its minimum use of electric energy and on its low
    cost of maintenance.
    Because of its functioning simplicity, the adsorption technology
    applicable to refrigerating systems differs significantly from that of
    absorption. In adsorption there occurs an interaction between
    a solid and a fluid e the transportation of the latter being
    a dependable thermal gradient, for it does not require the use of
    pumps. In the case of absorption, a solution interacts witha refrigerating fluid, calling for a number of electromechanical
    devices so as to move both the solution and the fluid.
    Moreover, the adsorption cycle depends on fewer electrome-
    chanical components (heat exchangers, valves). Conversely,
    adsorption refrigeration has exhibited performance coefficients
    lower than those obtained by liquid absorption. In the field of solar
    refrigeration by adsorption, various kinds of solid pairs have been
    considered; zeoliteewater [2,3] and silica gelewater [4,5] are used
    for cold storage, whereas activated carbonemethanol [6,7] and
    activated carboneammonia [8,9] are used for ice production.
    A comparative study between the liquid, chemical reaction and
    adsorption cooling systems was published by Meunier [10]. In all
    these systems, the mechanical energy consumption is kept to
    a minimum or null. This represents a great advantage over the
    conventional vapor compression systems, especially in countries
    like Brazil whose energy consumption depends heavily on hydro-
    electric power.
    Solar energy is abundant over large areas in Northeastern Brazil
    (annual average being over 6 kW/m2
    day), securing, as a result,
    a great potential supply for use in helio-thermal conversion
    systems applicable for both heating and cooling purposes. Many
    farm and fishing products are lost in this region, mainly because of
    unsatisfactory refrigeration, or otherwise, these products have their
    final value decreased for lack of economical frigorific preservation.
    In the last two decades, absorption chillers, running on natural
  1. 上一篇:商业公共建筑暖通空调系统英文文献和翻译
  2. 下一篇:冷冲压模具设计英文文献和翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. java+mysql车辆管理系统的设计+源代码

  9. 大众媒体对公共政策制定的影响

  10. 当代大学生慈善意识研究+文献综述

  11. 河岸冲刷和泥沙淤积的监测国内外研究现状

  12. 十二层带中心支撑钢结构...

  13. 酸性水汽提装置总汽提塔设计+CAD图纸

  14. 乳业同业并购式全产业链...

  15. 中考体育项目与体育教学合理结合的研究

  16. 杂拟谷盗体内共生菌沃尔...

  17. 电站锅炉暖风器设计任务书

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回