菜单
  

        The above literature review clearly reveals that heat transfer in PHE has been studied mainly for single-phase flow, especially for water. Very few data are available for the phase change heat transfer characteristics associated with the PHEs. Although R-410A is one of the most likely substitute for R-22, the two-phase heat transfer data for R-410A are still scarce. To continue our previous study on the phase change heat transfer for R-134a in PHE [4,5], the saturated flow boiling heat transfer characteristics and pressure drop for refrigerant R-410A flow in a vertical PHE are investigated experimentally in this study. In addition, empirical correlations will be developed for predicting the corresponding heat transfer coefficient and friction factor for R-410A boiling in the PHE.)at is close to what you need. Through these information systems, you may discover that someone already has manufacturing drawings, numerical control programs, and everything else required to manufacture your product. Engineers can then focus their professional competence on unsolved problems.
    In tacking such problems, the availability of high-powered personal computers and access to the information highway dramatically enhance the capability of the engineering team and its productivity. These information age tools can give the team access to massive databases of material properties, standards, technologies, and successful designs. Such pretested designs can be downloaded for direct use or quickly modified to meet specific needs. Remote manufacturing, in which product instructions are sent out over a network, is also possible. You could end up with a virtual company where you don’t have to see any hardware. When the product is completed, you can direct the manufacturer to drop-ship it to your customer. Periodic visits to the customer can be made to ensure that the product you designed is working according to the specifications. Although all of these developments won’t apply equally to every company, the potential is there.
    Custom design used to be left to small companies. Big companies sneered at it—they hated the idea of dealing with niche markets or small-volume custom solutions. “Here is my product,” one of the big companies would say. “This is the best we can make it—you ought to like it. If you don’t, there’s smaller company down the street that will work on your problem.”
    Today, nearly every market is a niche market, because customers are selective. If you ignore the potential for tailoring your product to specific customers’ needs, you will lose the major part of your market share—perhaps all of it. Since these niche markets are transient, your company needs to be in a position to respond to them quickly.
    The emergence of niche markets and design on demand has altered the way engineers conduct research. Today, research is commonly directed toward solving particular problems. Although this situation is probably temporary, much uncommitted technology, developed at government expense or written off by major corporations, is available today at very low cost. Following modest modifications, such technology can often be used directly in product development, which allows many organizations to avoid the expense of an extensive research effort. Once the technology is free of major obstacles, the research effort can focus on overcoming the barriers to commercialization rather than on pursuing new and interesting, but undefined, alternatives.
    When viewed in this perspective, engineering research must focus primarily on removing the barriers to rapid commercialization of known technologies. Much of this effort must address quality and reliability concerns, which are foremost in the mind of today’s consumers. Clearly, a reputation for poor quality is synonymous with bad business. Everything possible—including thorough inspection at the end of the manufacturing line and automatic replacement of defective products—must be done to assure that the customer receives a properly functioning product.
  1. 上一篇:PLC可编程控制器英文参考文献和中文翻译
  2. 下一篇:机械臂的控制数学建模英文文献和翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. 乳业同业并购式全产业链...

  9. 十二层带中心支撑钢结构...

  10. 大众媒体对公共政策制定的影响

  11. 杂拟谷盗体内共生菌沃尔...

  12. java+mysql车辆管理系统的设计+源代码

  13. 中考体育项目与体育教学合理结合的研究

  14. 酸性水汽提装置总汽提塔设计+CAD图纸

  15. 河岸冲刷和泥沙淤积的监测国内外研究现状

  16. 电站锅炉暖风器设计任务书

  17. 当代大学生慈善意识研究+文献综述

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回