菜单
  

     specifications, while global parameters are determined by both the design specifications and any relevant local param-eters. Taking the socket head cap screws shown in Fig. 6 as an example, the diameter (M) and pitch (P) of the screws are global parameters, while the other measures, such as V, X, W, L and l, are local parameters.

    4.4 Skeleton mechanism construction

     

    Once the parameters have been identified, a feature layer tree of the functional features for the main part of the progressive die is developed based on the design process, as shown in Fig. 10. Since various features of a progressive die can share a common functionality, all possible feature structures of a function must be pre-constructed when constructing the skeleton mechanism. When constructing a solid skeleton model of a die, only the selected functional features should be activated. All unselected functional fea-tures should be deactivated.

     1896 Int J Adv Manuf Technol (2013) 68:1887–1899

     When constructing skeleton mechanisms, design engineers should use all available preset sizes and constraints. All the dimensions are treated as parameters, whose values can be changed based on the design requirements. Since the values of the dimension parameters cannot be null or negative, every circumstance should be considered to avoid any potential problems, especially when there are cause-and-effect relation-ships among the various features. The number of constraints directly affects design flexibility. In most cases, the utilization of constraints can decrease the number of parameters and simplify the programming work. Therefore, an appropriate use of constraints is vital to the entire design process.

    4.5 Programming

    Programming aims to find all the relationships for each parameter that have been set up properly based on the input design information for such design as well as conforming to the design guidelines, design specifications, design process-es, and geometric operations. Then, the built-in modulus of the CATIA is used to convert the parameter relationship into a related program.

    To facilitate the design process, programs are pided into three levels. Taking the cam mechanisms as an example, the

     purpose of the first level is to select the main parts based on the design guidelines. This level of program takes advantage of two built-in modules of CATIA V5—Rule Editor and Formula Editor—to convert design guidelines into con-straints and formulas, which are used to determine the type, quantity, position, direction, and size of the main parts, as shown in Fig. 11a, b. The second level of the program is responsible for calculating the shape of the die. This level takes advantage of the built-in modules of CATIA V5 to construct the design table of the die based on the design specifications of each main part, so this level of program can use the design table to determine related independent and dependent parameters, as shown in Fig. 11c. The third level of the program is used to construct the model. Written by VB, this level of program is used to provide a modeling procedure of the main parts based on the type, quantity, position, direction, and dimension of the aforementioned two levels, as shown in Fig. 11d.

     

    4Once the skeleton mechanisms of the progressive dies have been programmed, the standard parts need to be assembled into main parts. The progressive die contains a large number

     Int J Adv Manuf Technol (2013) 68:1887–1899 1897

    Fig. 12 Assembly design process of progressive dies

    of standard parts, so it is necessary to plan a systematic process for the assembly design of the overall standard parts. Therefore, the assembly design operation could not only develop the procedural logic for the CAD system but also prevent mistakes in the assembly design.

    To standardize the assembly design process, first, it is nec-essary to collect information related to various assembly design processes for progressive dies and then analyze all standard parts for each progressive die. It is also necessary to consider the design guidelines and specifications of the main parts. Then, it is possible to develop a flowchart for the assembly design process of a progressive die, as shown in Fig. 12.

  1. 上一篇:斑马鱼LMO4同源基因英文文献和中文翻译
  2. 下一篇:混凝土温度应力的破坏与影响英文文献和中文翻译
  1. 立体光照成型的注塑模具...

  2. CAD/CAM模具技术课程教学改...

  3. 金属板料冲压模具计算机...

  4. PHP动态建模英文文献和中文翻译

  5. Java技术的Web应用设计模型...

  6. 模具以及模具的现代加工英文文献和中文翻译

  7. 冲压工艺规划和级进模设...

  8. 杂拟谷盗体内共生菌沃尔...

  9. 河岸冲刷和泥沙淤积的监测国内外研究现状

  10. 十二层带中心支撑钢结构...

  11. 当代大学生慈善意识研究+文献综述

  12. 中考体育项目与体育教学合理结合的研究

  13. 乳业同业并购式全产业链...

  14. java+mysql车辆管理系统的设计+源代码

  15. 酸性水汽提装置总汽提塔设计+CAD图纸

  16. 大众媒体对公共政策制定的影响

  17. 电站锅炉暖风器设计任务书

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回