菜单
  

    of  the.  subassemblies  m=&bed  Using  the  pradicate
    CURRENT-FIXTURE.
    Similarly,  the specification of  tools can  be described by the  following
    predicate
    ifrlisonassMlMymachineam
    ifrl is  not on  apsanbly  machinc om  CURRENT-TOOL  (  I1  ,  am  )  =
    where  am and  rl  are  two  variables repnSenting  assembly mechim and
    tools. respectively,
    if  tl  is not  on  any assembly machine
    if rl  is on  an assembly machine.
    .-=I"".  name of the  assembly machine,
    and
    if  am  has no tool mounted on  it
    '1=  Kif  the tod.  if am  has a tod  mound  on  it.
    It is assumed drat in a formula CURREW-TOOL(  tl  ,  am  ), 11 and  am  can-
    not be NULL at  the Same time.
    As  an example, consider  the state  tqnesentation  of the  assembly  in Fig-
    ure 1.  The  state of  the assembly  isrcprcsented  in both  relational form and
    component form.  Subassembly C1  is fixed by  the fixture F1 while com-
    ponent co  is a single component and has no fix-  assigned to it.  It is
    assumed  that there are  only two typts  of took  in this  system, a GRIPPER
    and a  SCREW_DRIVER.  currently. the GRIFTER  is mounted  on the
    assembly machine  ROBOT  and  the SCREW_DRIVER  is available  for use,
    but not mounted on  any assembly machine.
    2.3.  Knowledge  Acqulalon Mechanlsm
    The lolowledge acquisition mechanisn consists of three  modules.  l'k
    first module  is  the preoedence  knowledge  acquisition mechanism.  It utilizes
    the  CAD  description  of  aproduct from the  world database  and produces the
    precedence knowledge about  mating  tasks that is.  which  mating task
    should go  6rst and which  should go  next,  etc.  Based  on  the prrcedence
    knowledge,  the second module.  the fixture specification mechanism, finds
    those subassemblies  of the product which BIC suitable for applying fixtures.
    Integer programming techniques  are  used to  spec@  the faces on  which the
    fixture elements can  be  applied to  ensure successful  assemblying.  ?he third
    module is the  tool selection mechanism.  Based  on  the  tvpes  of mating  tasks
    in the CAD  model  and the took provided  in the assembly  cell,  this  mechan-
    ism specifies  which mating task should be performed by what tool accord-
    ing to availabk manuals or  experience.  In this  papa, we assume that  the
    tool selection  is simply a direct mapping  between tasks  and  took. thus  only
    the first  two mechanisms will be discussed.
    2.3.1.  Precedence Knowledge Acqulsftlon Mechanism
    The ordering of mating tasks  of a  feusible assembly plan has to satisfy
    certain constraints.  The knowledge about the ordering wnstraints among
    mating  tasb  is called the precedence knowledge  of an  assembly.  It has
    precondition  and  post-condition  l3.51.  ?he prc-condition  of a mating task
    (T,)  is the set  of states such that it is guaranteed  that  task  (Ti)  can  be suc-
    cessfully  pexfonned  once any  one of  these states appears.  The posr-
  1. 上一篇:数字化制造英文文献和中文翻译
  2. 下一篇:自动冲压模具英文文献和中文翻译
  1. 计算机辅助工艺规划CAPP系...

  2. 冲压工艺规划和级进模设...

  3. 零件识别的计算机辅助装...

  4. 大棚自动滴灌系统英文文献和中文翻译

  5. 自动刷镀技术的革新英文文献和中文翻译

  6. 基于虚拟装配的运动学分...

  7. S7-200自动化系统英文文献和中文翻译

  8. 乳业同业并购式全产业链...

  9. 电站锅炉暖风器设计任务书

  10. java+mysql车辆管理系统的设计+源代码

  11. 大众媒体对公共政策制定的影响

  12. 中考体育项目与体育教学合理结合的研究

  13. 河岸冲刷和泥沙淤积的监测国内外研究现状

  14. 当代大学生慈善意识研究+文献综述

  15. 酸性水汽提装置总汽提塔设计+CAD图纸

  16. 十二层带中心支撑钢结构...

  17. 杂拟谷盗体内共生菌沃尔...

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回