菜单
  

        3)  NURBS are not justified appearance strip runin curve treating
        Seven, safe quick-cutting mould problem
        1) Monitoring wearing a cutter away and destroying;
        2) Intensity that the bit links;
        3) Strict with the machine tool and the cutter examination is very important and before the average machine tool processing persity , safety protects and starts up.
        Eight, there exists problem in our country at present in adopt high speed to process the mould technology
        1 machine tool:
        1) domestic high-speed machine tool overall function still has the gap , the function component function to be able to not satisfy a request. Power and rotation rate including the electricity chief axis, entrance machine tool price is high;
        2)Under the machine tool high speed, the dynamic behaviour studies the function being not enough to affect a complete machine as a result,;
        3)The five scroll of machine tool is not enough mature , entrance machine tool price is very high;
        4) supporting technology and equipment are fairly incomplete
        2 cutters:
        1) domestic cutter is not able to adapt to the quick-cutting application , high speed cuts only entire treating especially stiffly. Entrance cutter price is high. The cutter technology is to affect quick-cutting processing a key factor of mould.
        2) supporting technologies are not enough to include hilt , online dynamic balance in complete set etc..
        3 high speed moulds process the technology and the experiment
        1) Be short of the accumulation applying experience since high speed processes the mould history comparatively shortly,;
        2)The comparison studying comparison stops throwing into lack, sets up a project to quick-cutting handicraft is difficult;
        3) Be short of the quick-cutting data base or the handbook , is still blank space at present;
        4) moulds produce the manufacturer cognition lack to quick-cutting , the analysis contrast being short of long range beneficial result;
        4 Be short of the quick-cutting automation programming software;
        5 Be short of a five scroll of gear quick-cutting automation programming CAM software.
    Concluding remark
        The mould marketplace has the intense need, but technology to be unable to keep abreast
        with to high speed treating. Starting is late, the basis is relatively poor , overall engineering
        level not being taller than , develops slowlyRequire that one by one, aspect coordinated
        growth , the product mimic inkstone throwing into combining with enlarging, each
        comprehensive utilization aspect strengths drive quick-cutting application in making in the
        mould.. Our hope , effort passing every aspect, before the market demand push go down ,
        pass technological progress, look like automobile , machine tool , home appliance , before
        long, not only our country being going to become a mould producing Great Power, and be
        going to become a mould producing the powerful country.

        References
        1. Jin Diecheng, Song Fangzhi. The modern mould makes the technology, Beijing: Mechanical industry press, 2001.
        2,.Xu Hefeng, The digitization mould makes the technology , Beijing: Chemical industry press, 2001.
        3.Zhao Bo ,High speed processes the forward position technology that the mould processes. Mould technology, 2000, (2)
  1. 上一篇:数据采集与监视控制系统英文文献和中文翻译
  2. 下一篇:塑料模具英文文献和中文翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. 中考体育项目与体育教学合理结合的研究

  9. 河岸冲刷和泥沙淤积的监测国内外研究现状

  10. 大众媒体对公共政策制定的影响

  11. 酸性水汽提装置总汽提塔设计+CAD图纸

  12. 乳业同业并购式全产业链...

  13. 杂拟谷盗体内共生菌沃尔...

  14. 电站锅炉暖风器设计任务书

  15. java+mysql车辆管理系统的设计+源代码

  16. 当代大学生慈善意识研究+文献综述

  17. 十二层带中心支撑钢结构...

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回