菜单
  

        electrolytic castings take shape the technology The electrolytic casting takes shape the technical principle to be same with the galvanization, is according to model the mold (ready-made product or female mold which makes according to product blueprint) is the datum (negative pole), places in the electrolytic casting fluid (anode), causes in the electrolytic casting fluid the metallic ion to return to original state a latter place deposition on the type mold, forms the metal shell, after strips it, contacts the surface with the type mold namely for the mold the cavity internal surface. This technical main characteristic is saves material, the mold manufacture cycle short, electrolytic casting level degree of hardness may reach 40HRC, enhanced the resistance to wear and the life, roughness, the size precision is completely consistent with the type mold, is suitable for the injection, attracts models, the blow molding, keeps out models, mold cavity and the electric spark and so on bakelite mold, glass mold, compression casting mold takes shape the electrode manufacture.  
        cavities surfaces fine pattern takes shape etching technology  The etching technology is optics, chemistry, the machining synthesis application one kind of technology, its basic principle is makes first the pattern design the film, then in has spread the film on pattern design duplication the photosensitive material on the mold cavity surface, process chemistry processing, the mold cavity surface does not form by the etching partial protectors, then acts according to the mold material quality, the choice corresponding etching craft, pattern design etching in mold internal surface.This technical main characteristic is the time short, the expense is low, patching damages the pattern design to be possible to achieve flawlessly.
    3 sprinkle to cast into the type system mold technique Sprinkling to cast into technical and common characteristics of the type system mold is according to the kind piece for basis, sprinkle a convex and cave mold, a surface do not need the machine to process.Make physically to mainly have following several categories type in the mold.
    4 extrusions takes shape the technology  Using the berylliuim copper alloy good thermal conductivity and the stability, after the solid melt aging treatment of metal, use the swaging pressure to make the mold concave model cavity. Its characteristic is makes the cycle short, the cavity precision is high (the IT7 level), surface roughness Ra=0.025 mu m, The intensity is high, the life may reach 500,000 times, does not have the environmental pollution. This technology is using the metal material in the thin crystal grain, certainly takes shape the temperature, under the low distortion speed condition, when the material has the best superplasticity, toes attend to carry out raised mold which the initiative finishes, then may extrude the concave mold with the small strength one kind of fast economical pattern making technology. Ultra models takes shape material typical representative is Zn-22%AL.   
    5 does not have the mold multi- spots forming technology  Does not have the mold multi- spots fast forming technology is by CAD/CAM/CAT The technology is the main method about, may adjust the base main body group highly using the computer control to form forms the surface, replaces the traditional mold to carry on the three dimensional curved surface forming to the sheet an modern advanced manufacture technology. This technology may change the distortion way and the stressful condition at will, enhances the material the formed limit, may form repeatedly, by this elimination material interior remaining stress, the realization does not have the snapping back forming
    6 triumphant Uygur bright steel belt blanking falls the material pattern making technology  The new steel belt blanking falls the material pattern making technology is one kind is different with has raised, the concave mold structure steel belt mold generally, it is with specially makes the new fast economical pattern making technology by the single edge steel belt which the backing strip is composed. This kind of mold weight is light, only then 200kg, the processing precision for ±0.35-0.50mm, may suit each kind of black and the non-ferrous metal 0.5-0.65mm thick sheet processing generally. The life may achieve 5-25 ten thousand, the production cost is low.
  1. 上一篇:加强钢筋混凝土箱梁抗扭英文文献和翻译
  2. 下一篇:注塑模具外文文献和翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. 乳业同业并购式全产业链...

  9. 杂拟谷盗体内共生菌沃尔...

  10. 电站锅炉暖风器设计任务书

  11. 酸性水汽提装置总汽提塔设计+CAD图纸

  12. 十二层带中心支撑钢结构...

  13. 中考体育项目与体育教学合理结合的研究

  14. 当代大学生慈善意识研究+文献综述

  15. 大众媒体对公共政策制定的影响

  16. 河岸冲刷和泥沙淤积的监测国内外研究现状

  17. java+mysql车辆管理系统的设计+源代码

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回