菜单
  
    摘要本文用两亲分子为原料包覆AXX,探索较佳防吸湿包覆工艺。以吸湿率降幅和包覆层质量分数为评价指标,以十八酸,十八醇,十八胺,十八酰胺等直链C18两亲分子为原料,先探索同一碳链长度不同极性基团分子及其投加量对改性硝酸铵吸湿性的影响,得到较佳防吸湿包覆工艺;同时,对包覆产物进行FTIR和SEM表征,分析包覆机理。进一步,尝试将得到的较佳工艺应用于AXX防吸湿改性包覆研究。结果表明:当表面活性剂为十八醇,投加量为2.000g时,包覆效果较佳;包覆样品在35℃、相对湿度68.5%条件下吸湿24h后,吸湿率降幅达20.1%,包覆层质量分数为1.04%;FTIR和SEM表征说明硝酸铵表面包覆有十八醇,并且颗粒表面结构得到改善;将该条件应用于AXX吸附包覆,所得包覆样品在35℃、相对湿度51%条件下吸湿24h后,吸湿率降幅为7.5%,包覆层质量分数为1.9%;由此,上述得到的包覆工艺可为进一步探索表面活性剂两亲分子改性AXX工艺机理提供了一定的研究基础。27023
    关键词  AXX,硝酸铵,两亲分子,吸附,表面改性,吸湿性,工艺
    毕业论文设计说明书外文摘要
    Title  The preliminary Study on the Coating Process of AXX with Amphiphilic Molecules  
    Abstract
    Using amphiphile molecules as raw material,the better coating process of AXX for anti-hygroscopicity was researched in this paper. Anti-hygroscopicity effects of the same length of carbon chains with different polar groups such as stearic acid,octadecylamine,octadecanol,stearamide,and their different dosage were explored,using the decreasing amplitude of hygroscopicity and the coating layer mass fraction to evaluate the product,and then the better coating process was obtained;Meanwhile the coated product is characterized by FTIR and SEM ,the coating mechanism is also analysised.Furthermore,the obtained better coating process is tried to apply on the study of anti-hygroscopicity of coated AXX.Result showed that the decreasing amplitude of hygroscopicity of the coated sample reached 20.1% with 1.04% of the coating layer mass fraction when the used octadecanol was 2.000g and the testing condition was 35℃ of temperature and 68.5% of relative humidity and 24h of testing time;and the FTIR spectroscopy and SEM confirmed that the modified AN was coated with octadecanol,and its surface structure was improved; specially the obtained sample of AXX modified had a 7.5% of the decreasing amplitude of hygroscopicity and 1.9% of the coating layer mass fraction while this better process was applied on AXX;therefore ,the coating process above could lay a certain research foundation of the further study on exploring the surface modification of AXX for anti-hygroscopicity with amphiphile.
    Keywords  AXX, Ammonium Nitrate, Amphiphile, Adsorption, surface modification, Hygroscopicty, Process
    目 录
    1 绪论    1
    1.1 硝铵盐性质及应用    1
    1.2 硝铵盐吸湿性    1
    1.3 国内外进展    1
    1.3.1 物理涂敷    1
    1.3.2 表面化学改性    2
    1.3.3 胶囊化包覆    3
    1.4 存在问题    5
    1.5 本课题研究意义    5
    2 实验部分    6
    2.1 实验药品及仪器    6
    2.2 实验原理    7
    2.2.2 硝铵盐改性原理    7
    2.2.3 表面活性剂防吸湿原理    8
    2.2.4 评价指标    8
    2.3 实验方案    10
    2.3.1 原材料性能测试    10
    2.3.2 十八酸包覆AN练习实验    10
    2.3.3 不同极性基团直链C18表面活性剂包覆AN实验    10
    2.4 实验步骤    11
    2.4.1硝酸铵处理    11
  1. 上一篇:面向硝化纤维素检测应用的分子印迹聚合物基传感器的制备表征及性能研究
  2. 下一篇:离子液体改性GO与白炭黑并用补强天然橡胶性能的研究
  1. 高分子基多孔纤维材料的制备及应用

  2. 氯化胆碱单分子层修饰电...

  3. 偶极分子气液表面性质的分子模拟及研究

  4. 二甲亚砜中氢型分子筛催...

  5. ZSM-5X分子筛吸附分离木质素基芳香醛的研究

  6. 氧化石墨烯/金纳米树突的...

  7. 小分子氨基硝酸离子液体...

  8. 大众媒体对公共政策制定的影响

  9. 中考体育项目与体育教学合理结合的研究

  10. 电站锅炉暖风器设计任务书

  11. 杂拟谷盗体内共生菌沃尔...

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 乳业同业并购式全产业链...

  14. 当代大学生慈善意识研究+文献综述

  15. 十二层带中心支撑钢结构...

  16. 河岸冲刷和泥沙淤积的监测国内外研究现状

  17. java+mysql车辆管理系统的设计+源代码

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回