- 上一篇：掺杂型红外反射材料的制备及性能研究
- 下一篇：Al/NiO含能复合薄膜材料研究
摘要抗红外烟幕干扰材料研究为了更好的研究红外烟幕材料，本文首先对一些冷烟幕材料的红外光谱表征，得到一些常见材料的红外透过率光谱，定量地描述其红外光谱衰减特性，以便于选择更好的干扰材料；然后进行了一种新型红外陶瓷材料的制备，利用红外光谱仪、SEM、差热分析仪等仪器对它的表观形貌、粒径、热分解性和红外透过率光谱等进行了表征；最后，为了增强铜粉作为红外烟幕材料的性能，采用溶胶--凝胶法制备了SIO2/铜粉复合粒子，研究了搅拌等工艺条件对材料包覆的影响，并且利用红外光谱仪、SEM、差热分析仪等仪器对它的表观形貌、粒径、热分解性和红外透过率光谱等进行了表征。64345
毕业论文关键词 红外陶瓷 烟幕 包覆
毕业设计说明书（论文）外文摘要
Title Propellant surface deterring processing technology
Abstract To deter the propellant surface treatment is to improve the combustion performance, access to important technical progressive combustion method. Currently, the traditional deterred technique applies only to single-base propellant plasticizer-free and plasticizer content is low (<15%) of the double-base propellant, for high energy propellant plasticizer content, difficult to solve deterred agents penetrate to the propellant surface to form a concentration gradient and the long-term storage during the conflict between the anti-migration.
This paper is to discuss the new design and desensitized TPTM with azide reaction of nitramine propellant activity deterred process by liquid phase granular seven holes on the drug for DA deterred, in propellant surface to form a concentration gradient, discussion of different process conditions Effect on the deterred. Closed bomb test results show that desensitized with traditional polyester propellant energy after the PPA reduction deterred more desensitized TPTM new deterred propellant after the energy is essentially the same. Heat accelerated aging test results show that, TPTM anti-migration performance is poor, not suitable for DA desensitized propellant; to TPTM desensitized propellant for the before and after the combustion is essentially the same aging, anti-migration performance is good. Comprehensive comparison of TPTM desensitized propellant for the deterred effect of temperature is 60 ℃, deterred, deterred agent in volume of 3% 1h propellant deterred better overall performance.
Keywords gun propellant high plasticizer concentration surface deterring anti-mobility progressive combustion
毕业设计说明书（论文）外文摘要
Title Anti infrared interference materials research
Abstract In order to study the infrared smoke screen material, this paper first infrared spectral characterization of a variety of common materials, get some common materials in order to understand the infrared spectra, infrared absorption properties of these materials; then the cordierite was prepared, and the study of infrared spectrum, its SEM, particle size and TG, effects of temperature and the change and process change on cordierite prepared, cordierite infrared ceramic material with infrared absorption properties of the prepared; at the same time, in order to enhance the bronze powder as the performance of infrared smoke screen material, SiO2/bronze powder composite particles were prepared by sol-gel method, study process conditions of agitation on the influence of cladding material, and the change of bronze powder composite particles were various properties.
Keywords Infrared ceramic smoke screen cladding
1 绪论 1
1.1 烟幕干扰材料概述 1
1.2 抗红外烟幕材料的研究现状
-
β-环糊精-超声波协助提取...
-
Mg-PTFE薄片红外辐射材料的燃速控制技术研究
-
微米级铜粉红外烟幕材料的抗腐蚀技术研究
-
GC-MS柚子皮精油的提取及抗氧化性能的研究
-
掺杂型红外反射材料的制备及性能研究
-
电化学与有机膜耦合抗污染性能的研究
-
高反射率近红外反射颜料的制备及其表征
十二层带中心支撑钢结构...
java+mysql车辆管理系统的设计+源代码
河岸冲刷和泥沙淤积的监测国内外研究现状
乳业同业并购式全产业链...
酸性水汽提装置总汽提塔设计+CAD图纸
电站锅炉暖风器设计任务书
当代大学生慈善意识研究+文献综述
大众媒体对公共政策制定的影响
中考体育项目与体育教学合理结合的研究
杂拟谷盗体内共生菌沃尔...