- 上一篇：双脉冲激光联合打孔研究现状
- 下一篇：控制力矩陀螺研究现状和参考文献
[11] Kasturi, P., Dupont, P. Constrained optimal control of vibration dampers. Journal
of Sound and Vibration , 1998, 215(3), 499-509.
[12] Tang, G.Y., Ma, H., Zhang, B.L. Feedforward and feedback optimal control for
discrete linear systems with disturbances. Control and Decision, 2005, 20(3), 266-
270 (in Chinese).
[13] Wang , W., Tang, G.Y. Feedback and feedforward optimal control for offshore
jacket platforms. China Ocean Engineering, 2004, 18(4), 515-526.
[14] Lee, M.N., Lee, J. K. Design of a robust track-following controller for optical
disk drives [J]. IEEE Transactions on Consumer Electronics, 2004, 50(2): 723-
731.
[15] Mulgund, S.S., Stengel, R.F. Optimal nonlinear estimation for aircraft flight
control in wind shear [J]. Automatica, 1996, 32 (1): 3-13.
[16] 竺艳蓉. 海洋工程波浪力学[M]. 天津: 天津大学出版社, 1991: 9-13,64-72.
[17] 刘应中,缪国平. 海洋工程水动力学基础[M]. 北京: 海洋出版社, 1991.
[18] 李远林. 近海结构水动力学[M]. 广州: 华南理工大学出版社, 1999.
[19] 金振逸,马少杰. 基于线性波理论的海上浮动平台受力及运动分析[J]. 四川兵工学报, 2001, 32(8):135-137.
[20] 刘立平. 墩柱结构及其海床土体在波浪作用下的动态响应[D]. 武汉: 武汉理工大学, 2003.
[21] Ma,H., Tang, G.Y., &Hu, W. Feedforward and feedback optimal control with
memory for offshore platforms under irregular wave forces. Journal of Sound and Vibration, 2009, 328: 369-381.
[22] 吴宋仁. 海岸动力学[M]. 北京: 人民交通出版社,2000.
[23] 巨永峰,李登峰. 最优控制[M]. 重庆: 重庆大学出版社,2005.
[24] 胡寿松,王执铨. 最优控制理论与系统[M]. 北京: 科学出版社,2005.
[25] 吕显瑞,黄庆道. 最优控制理论基础[M]. 北京: 科学出版社,2008.
[26] 解学书. 最优控制理论与应用[M]. 北京: 清华大学出版社,1986.
[27] S.H.O.R. Luus. Optimal feedback control of time-delay systems . A.I.CH.E.
Journal, 1976,22(1): 140-147.
[28] Lancaster, P., Lerer, L., Tismenetsky, M. Factored forms for solutions of AX-XB
=C and X-AXB=C in companion matrices [J].Linear Algebra and Its Applications, 1984, 62: 19-49.
[29] Tang,G.Y. Feedforward and feedback optimal control for linear systems with sinusoidal disturbances [J]. High Technology Letters, 2001, 7(4): 16-19.
[30] Wang,H. Optimal vibration control for offshore structures subjected to wave
loading with input delay. International conference on measuring technology and
mechatronics automation, 2009, 853-856.