摘要:近些年来我国高速列车的不断发展,列车的速度不断提高,特别是高速动车组的运营标志着列车的速度上了一个新的台阶。但是随着列车速度的不断提高,列车自身的振动幅度也在不断的增加,成为危害列车安全运营的主要问题之一。因此,研究这个课题并且找到列车振动的主要原因与解决方法是十分关键的。要了解并逐步解决这个问题,需要对列车进行动力学仿真,本论文根据国内高速动车组利用SIMPACK建立了列车的仿真模型,模拟并研究了列车在同一速度的情况下不同部位的振动幅度、列车在不同速度情况下同一部位的振动幅度与列车在同一速度的情况下车体不同部位的不同的振动幅度,通过从这三个不同的层次与情况来剖析国内高速动车组的振动特性,并且得出高速动车组振动特性一般性结论。58298
毕业论文关键词: 振动特性;高速动车组;SIMPACK;
Research on Train Vibration Characteristics
Abstract:In recent years, the continuous development of China's high-speed trains, the speed of the train is constantly improving, especially high-speed EMU Operation marks a new step on the speed of the train. However, with the continuous improvement of the train speed, the amplitude of the train itself is constantly increasing, and become one of the main problems that endanger the safety operation of the train. Therefore, it is very important to study the problem and find out the main cause and solution of train vibration. To understand and gradually solve the problem, the need to train on the dynamic simulation, this paper according to the high speed EMU using SIMPACK simulation model was established based on the train. Simulation and Study on the train at the same speed in different parts of the vibration amplitude and train in the same speed in the same site vibration amplitude and train at the same speed in different parts of the body different vibration amplitude by from the three different levels and to analyze the vibration characteristics of the high speed EMU, The general conclusion of vibration characteristic of high speed train is obtained.
KeyWords: Vibration characteristics;EMU;SIMPACK;
目 录
1绪论 1
1.1 选题的目的和意义 1
1.2 高速动车组的现状和发展 4
1.3本论文的主要工作 4
2多体动力学原理及动力学性能评价 6
2.1多体动力学概念与发展 6
2.2多体动力学建模与分析的一般过程 7
2.3多体动力学软件 SIMPACK简介 7
2.4动力学性能评价指标 8
2.5本章小结 9
3动力学仿真模型的建立 10
3.1列车动力学仿真的发展 10
3.2 模型的建立 10
3.3本章小结 17
4车辆振动特性仿真分析 18
4.1 特定速度下列车不同部位的振动特性分析 18
4.2 不同速度下列车的振动特性分析 20
4.3车体不同部位的振动特性分析 23
4.4 本章小结 25
5总结与展望 26
5.1 总结 26
5.2 展望