- 上一篇：组态软件中变量库的实现
- 下一篇：PSO算法粒子群算法在局域网中的并行实现研究+程序
摘要：本文使用北京亚控自动化软件科技有限公司的组态王 6.52 版本进行组态画面设计， 其中加入 PID 算法整定，使双容水箱液位得以实现定值控制。运用 Kingview 组态软件对 整个系统的画面进行绘制，然后实现该系统画面上的连接，之后再和实验平台上的双容水 箱直接通讯，通过串口连接实现软件本身与下位机之间的数据通信。同时可以提供液位的 报警以及实时曲线和历史曲线的记录。本文分为五个部分对双容水箱液位控制系统的软件 以及硬件两个方面作出细节性的论述。其中第一部分对水箱液位控制系统的研究目的及意 义，国内外的发展历史、现状及未来发展趋势。第二部分概述整个系统的构成以及所需的 算法进行介绍，对系统初步构造进行方案整合；接下来的第三部分将对接下来的系统建模 以及 PID 参数整定进行概述；然后第四部分将介绍组态王 6.52 版本软件以及双容水箱液 位定值控制系统进行画面设计及运行；最后一个部分将对系统的上位机与双容水箱进行连 接调试，进行实验收集实验结果。进行分析，最终使双容水箱液位定值控制系统的以完成。67323
毕业论文关键词：双容水箱；组态王 6.52；PID 算法；液位定值控制
Design of Liquid Level Control System for Double capacity
Abstract :In this paper, the use of Beijing Asia control Techonlogy Limited Liability Company Kingview 6.52 version of the configuration of the screen design, which added PID algorithm tuning, so that the dual capacity of the tank level to achieve value control. The host computer software configuration, animation connection, and then with the experimental device on the dual capacity of the water tank to connect, through the serial port connection between the host computer and the next computer data communication between. At the same time can provide liquid level alarm and real-time curve and historical curve of the record. This paper is pided into five parts on the dual capacity of the tank level control system software and hardware to make a detailed discussion of two aspects. The first part of the research on the purpose and significance of tank water level control system, the development history, the present situation and the future development trend of the domestic and foreign.the second part summarizes the
composition of the whole system and the required algorithm to introduce the system to the initial structure of the program integration; the next part of the third part of the system modeling and PID parameters will be outlined; and then the forth part will be introduced The kingview of
6.52 version of the software and double tank water tank level control system for the screen design and operation; the last part of the system will be the host computer and dual-capacity water tank connection debugging, experimental collection of experimental results. To carry out the analysis, and finally to double the capacity of the tank level control system to complete.
KeyWords:Double capacity water tank; configuration king 6.52; PID algorithm; liquid level control
目 录
1 绪论 1
1.1 该课题的研究目的及研究意义 1
1.2 国内、国外的历史研究、发展水平及现在状况 1
1.3 发展趋势 4
2 双容水箱液位控制系统算法及 PID 算法介绍 5
2.1 水箱液位控制系统算法的介绍 5
-
液位控制系统的专家PID控制与MATLAB仿真程序
-
改进型PID算法在双水箱控制系统中应用研究
-
MATLAB一阶不确定时滞系统PID的三维空间实现
-
Labview基于NIPAC的水箱液位...
-
PID双水箱串级控制系统S...
-
MLD模型三容水箱混杂系统仿真研究
-
PIC16F877A单片机PID直流电机...
十二层带中心支撑钢结构...
大众媒体对公共政策制定的影响
中考体育项目与体育教学合理结合的研究
电站锅炉暖风器设计任务书
河岸冲刷和泥沙淤积的监测国内外研究现状
乳业同业并购式全产业链...
当代大学生慈善意识研究+文献综述
酸性水汽提装置总汽提塔设计+CAD图纸
java+mysql车辆管理系统的设计+源代码
杂拟谷盗体内共生菌沃尔...