摘要： 本设计为上海某办公楼通风空调制冷工程设计。总建筑面积约为5000m2。该建筑从地上一层大厅、展厅设全空气空气调节系统,空调冷媒为7/12°C冷水,由冷水机房提供,空调热媒为60/50℃热水,由换热站提供。办公建筑考虑其单独调节性及舒适要求均采用风机盘管加新风的空调系统。新风机组将新风处理至室内状态焓值直接送入室内，不再另设空气处理装置。建筑消防上对消防楼梯间及电梯前室设置了火灾时加压送风设备。34416
风机盘管家新风系统除卫生间设置排风系统其他房间的排风均采用自然排风，不单独设置排风系统。各风管上设置防火阀门，平时开启，着火时关闭。风机盘管水系统各层水平主管路为同程布置,水管路系统中最高点设置排气装置(自动排气阀),最低点设置泄水装置(泄水阀门).
毕业论文关键词：  全空气系统；风机盘管加新风系统；空调水系统；同程式
Air Conditioning Project of a Office Building in Shanghai
Abstract：This is designed for ventilated air conditioning cooling project of a technical hotel located in Dalian. With the total building area of 32275 square meters, the hotel erects from the underground floor to the top floor including eleven floor, Which accommodates rooms opening at different hours and for different functions. Trading business of the first floor is equipped with all air system,While considering the differences which lie in the time and frequency the rooms are used, the room and multi-functional hall in the second floor use the air conditioning system. Manual regulation of air conditioning in offices and guest rooms should be available in order to meet personal needs, so these rooms also employ the system of fan coil fresh air. New air set alone can deal with the fresh air until it reaches the indoor standard and then can be released to the inner space.            
In the basement is to send, drain the air and smog to make it fireproof. Air draining use the same pipe ,While other rooms use natural draining Without special draining system equipped. To each wind pipe fireproof are attached, switched on in peacetime and off otherwise. Different routes are used in water pipe system which is composed of two standing pipes separating the building into two sections to supply water, and therefore make the burdens of the pipes less uneven.
Keywords： All-air systems；FCU+FA SYSTEM；Air conditioning water system；Same return system
目录
1   资料采集.1
1.1 前言    1
1.2 设计资料    1
1.2.1 设计课题名称    1
1.2.2 设计原始资料:    1
1.2.3 动力与能源资料    2
2   负荷计算.3
2.1 冷负荷计算    3
2.1.1建筑围护结构冷负荷    3
2.1.2 照明散热形成的冷负荷    4
2.1.3 人体散热形成的冷负荷    5
2.2 湿负荷计算    6
2.2.1 人体散湿量    6
2.2.2 敞开水表面散湿量    6
2.3热负荷计算    7
2.3.1 围护结构的基本耗热量    7
2.3.2 围护结构的附加耗热量    8
2.3.3 门窗缝隙渗入冷空气的耗热量    9
2.4 新风负荷计算    9
2.5 建筑负荷计算    10
3   空调系统的划分与组成13
3.1空气调节系统的分类    13
3.2系统方案确定    14
4   空气处理过程及设备选型.16
4.1新风量的确定原则    16
4.2 送风方式确定    16
4.3 送风状态和送风量的确定    17 上海某办公楼空调系统设计+CAD图纸:http://www.751com.cn/gongcheng/lunwen_31909.html