摘要本课题所进行结构设计的车用空气净化装置是针对于小型客车设计的一套具有智能检测与控制功能，集车内空气外循环通风、内循环净化和逃生功能于一体的环保智能天窗，是解决车内空气污染的有效途径。该课题通过根据客车车内新鲜空气的换气量对净化装置内循环与外循环风道进行计算从而确定风道尺寸与外观形状，以及安装位置的确定，使用三文建模软件进行建模，并使用二文制图软件完成二文工程图纸，最后完成三文模型的装配并对关键部件进行强度校核。通过本文的设计工作可提高环保智能天窗的自动化、智能化水平以及实用有效性，实现对车内空气的充分净化且节省车内空间，全面提升客车的环保实用性能。28657
关键词  车用空气净化装置  内循环  外循环  实用环保
毕业论文设计说明书外文摘要
Title   Structure design of air purification equipment for vehicle                                          
Abstract
The structure design of the car air purification device in the subject,is designed for a small bus with a set of intelligent detection and control functions,external circulation is used to be ventilation to air inside the car,and internal circulation purification and escape function in one of the environmental protection intelligent skylight,is the effective way to solve air pollution in car. In the subject ,according to the air exchange quantity of the fresh air inside the bus,the circulation and the outer circulating air duct of the purification device are calculated,determine duct dimensions and appearance shapes,used to determine the installation position,used 3D modeling software to modeling,and used 2D graphics software complete the 2D engineering drawings.Finally,complete 3D model assembly,and strength check to key parts.So then improve automation,intelligent level and practical validity of the environmental intelligence skylight.Realize the full purification of air in the car and save space of the car,improvement environmental protection and practical performance of the passenger car overally.
Keywords  Air purification equipment for vehicle    internal circulation    External circulation    Practical and environmental protection
目   次
1  引言    1
1.1  课题背景及研究意义    1
1.2  国内外研究现状    2
1.3  课题研究内容    3
2  车用空气净化装置的总体设计    5
2.1  内循环出风口与回风口的形状与大小设计    5
2.2  外循环通风口的形状与大小设计    7
2.3  车用空气净化装置零部件设计    8
2.3.1  风机    8
2.3.2  净化装置    9
2.3.3  内循环风道    10
2.3.4  逃生通道标志    11
2.3.5  内循环回风口与出风口    12
2.3.6  外循环风道    13
2.3.7  顶盖    15
2.3.8  上支承    16
2.3.9  下支承    16
2.3.10  密封橡胶条    17
2.3.11  部件圆角    17
3  车用空气净化装置的有限元分析与流场动力学分析    19
3.1  车用空气净化装置材料的选定及性能介绍    19
3.2  车用空气净化装置的有限元分析    20 车用空气净化装置的结构设计:http://www.751com.cn/jixie/lunwen_23585.html