solidworks大型缸套专用立式车床定横梁组件设计+CAD图纸

摘要缸套是柴油机的关键部件，直接决定柴油机性能的优劣。这就必须重视柴油机最主要的滑动部件气缸套的研究及其制造装备的研发。本次课题就是针对大型缸套专用立式车床的设计，横梁是立式车床重要的部件。

本论文主要研究横梁的三维建模及有限元分析。通过对横梁静态特性的分析来验证所设计横梁是否满足要求，从而确保车床的整体性能优良。主要内容如下：

（1）查阅资料确定机床结构，利用solidworks对立式车床的进行三维建模，确定横梁的具体参数。50295

（2）在保证充分反映横梁实际力学性能和保留横梁主要参数的前提下对横梁模型进行一定的简化处理，大幅度节约运算时间。

（3）通过静态分析，针对横梁在三个不同极限位置进行有限元分析,得到三个位置上的横梁在此工况下的变形云图和应力云图，从而得到横梁的最大应力和应变，对比参数，分析所设计横梁是否满足要求。

毕业论文关键词：大型缸套；立式车床；横梁；有限元分析；ANSYS

Abstract

Cylinder sleeve is a key part of diesel engine, it directly determines the merits of the diesel engine performance. It must attach importance to the sliding parts of the main diesel engine cylinder sleeve's research and manufacturing equipment research. This issue is designed the vertical lathe for the large cylinder sleeve processed. Beams are important components of vertical lathe．

This thesis mainly studies three dimensional modeling and finite element analysis of the beam. The analysis for the static dynamic characteristics of the beams is used to verify the designed beam whether meet the requirements to ensure that the overall performance of vertical lathe. Mainly research contents as follows：

(1)Determine the machine tool structure by Accessing to information. Construct the three dimensional modeling of the vertical lathe by using the solidworks. Determine the specific parameters of the beam.

(2)Under the premise of ensuring fully reflect the actual mechanical properties of the beams model and Keeping the main parameters of the beams model，simplifying the model to save significant computing time．

(3) By the dynamic analysis，the Finite Element Analysis of beams model in Three different limit position are carried out, the stress diagram and displacement diagram of the beams are also calculated, maximum stress and strain of the beams is obtained, analyze the beam design whether meet the requirements by the comparison parameters.

Keywords：Large cylinder sleeve; Vertical lathe; Beams; Finite element analysis; ANSYS

第一章绪论1

1.1 课题研究背景及意义1

1.1.1 基于复合材料的常规本构模型的细观结构优化设计的局限性1

1.1.2 数控机床的组成工作原理及特点2

1.1.3 大型缸套的加工3

1.1.4 中心架定心机构的研究现状3

1.2 国内外发展状况3

1.2.1 国内研究状况3

1.2.2 国外研究状况4

1.3 建模软件介绍5

1.3.1 SolidWorks软件概述5

1.3.2 ANSYS软件概述-6

1.4 课题主要研究内容及研究方法措施6

1.4.1 课题主要研究内容6

1.4.2 研究方法、步骤和措施等-7

1.5 本章小结7

第二章大型缸套专用立式车床定横梁组件三维CAD建模-8

2.1 CAD的概述-8

2.1.1 计算机辅助设计的基本概念及内容8

2.1.2 计算机辅助设计的发展9

2.2 大型缸套专用立式车床三维建模9

2.2.1大型缸套专用立式车床主要技术指标9

2.2.2大型缸套专用立式车床三维建模-10

2.2.3大型缸套专用立式车床定横梁组件三维建模-10 solidworks大型缸套专用立式车床定横梁组件设计+CAD图纸:http://www.751com.cn/jixie/lunwen_53603.html