摘要本课题主要是针对摩托车手把盖的注塑模具设计，该盖材料为尼龙1010，是工业生产中常见的一种保护盖产品。通过对塑件进行工艺的分析和比较，最终设计出一副注塑模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、侧向抽芯机构、顶出系统、冷却系统、注塑机的选择及有关参数的校核都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺。根据题目设计的主要任务是圆盖注塑模具的设计，也就是设计一副注塑模具来生产塑件产品，以实现自动化提高产量。62939

毕业论文关键词  注塑模具 手把盖 

Title      motorcycle handle cover injection mold design  

Abstract Abstract ：The main topic covered for motorcycle handle cover injection mold design, the cover materials is PA1010, is commonly found in industrial production of a protective cover products. Through the process of plastic parts for analysis and comparison, the final design of an injection mold. The product mix from technology issues, and specific mold structure of the casting mold system, mold forming part of the structure, side pumped body, top of the system, cooling system, the choice of injection molding machine and related calibration parameters are detailed design, at the same time and developed a simple process dies. Through the entire design process that the mold can be achieved by the plastic parts processing requirements. Designed in accordance with the subject's main task is to build a round plastic injection mold design, that is, the design of an injection mold to produce plastic products in order to achieve automation to increase production. Plastic parts for the specific structure of the mold is the spokes-style single-gate injection mold surface. 

Keywords  Injection mold, handle cover 

目   次

1. 绪论 6

2. 工艺设计 7

2.1. 塑件的结构工艺性分析 ： 7

2.2. 材料选择 8

2.3. 成型工艺 9

2.4. 注射成型工艺过程 9

3. 模具总体方案 10

    3.1. 注射模的结构设计 10

    3.2. 方案的论证和比较 12

3.3. 顺序打开结构 16

4. 模具详细设计 16

4.1. 成形零件的工作尺寸计算 17

4.1.1. 型腔的径向尺寸 17

4.1.2. 型芯的计算 17

4.2. 动模板的强度校核 18

4.3. 模架的选定 19

4.4. 注塑机初选 19

4.5. 成型设备的的校核 19

4.5.1. 模具闭合高度的校核 19

4.5.2.  注射机有关参数 19

4.5.3. 开模行程的校核 19

4.5.4. 模具安装部分的校核 19

4.5.5. 注塑机参数的校核 19

4.6. 浇注系统设计 摩托车手把盖注射模具设计:http://www.751com.cn/jixie/lunwen_69270.html