- 上一篇：釜式反应器英文文献和中文翻译
- 下一篇：建筑空调英文文献和中文翻译
Further characterized in that said nut (15) is mounted on the shaft (10) on the bearing sleeve (6) cooperating rib.
Covered further characterized in that said pulley (11) of the base (12) with the bearing sleeve (6) fitted at the lower part of the holes outside the park and its base is connected to the side of the window openings, the opening hole has corresponding to the bolt holes (14).
A further feature: in the slurry tank (19) and the bearing sleeve (6) is provided between the shaft portion of a shaft (10) with the rejection of the water tray (17), excluding the rubber seal with a centrifugal force (18) and the filler (4) drops out of the water at.
There is also a feature that: said turntable (23) is a V-type 6 Alex.
Below with reference to the drawings further illustrate the utility model: Figure 1 is a block diagram of the utility model in Figure 2 is a schematic diagram of the installation of the utility model with reference to Figure 1, hydro pulper tank (2) the best selection of D shapes , its ability to ease the stronger than circular turntable (23) Alex 6 volt type using replaced inlay piece, not only good rigidity and inertia force, large eddy interval, ease and strong, in order to protect the turntable (23) and reducing the core section and the slurry under a vacuum pressure in the wheel (23) is connected to a spiral plate (1), wheel (23) by the vertical movement of the nut (15) and the bearing sleeve (6) is realized with the effect of , the bearing sleeve (6) is the upper hole mounting radial ball bearings (16), the lower end of the hole is cone roller bearings (13), nuts (15) placed the upper and lower sets (7), (9) When moving the handle (8) adjustment dial (23) and sieve (22) distance, first loosen the base (12) opening the bolt, adjust and must be tight. The tank (2) and the bottom surface of the top seat (20) a connection between the plate (21) for mounting the sieve (22) and trough (20). Pulp from the sieve into the slurry tank and from the nozzle (5) outflow.
Referring to Figure 2, the use of the utility model operating platforms (26) can also be used with reinforced concrete steel production, the motor (25) and the base of the foundation base (24) can face brick cement mortar plants, can also be welded steel, the tank ( 2) on the positioning plate (3) tight in console (26) on.
The utility model has the ability to ease, little vibration, easy to use, type of production capacity than ZDS1 1.3-1.4 times, not only for a variety of pulp can also ease rice, wheat straw, is an ideal mechanism.
摘要
本发明公开了一种连续式高浓水力碎浆机，其发明点是所述槽体的内腔、碎浆机转子下方设有纸浆筛分装置，所述纸浆筛分装置将槽体内腔分隔为碎纸腔和良浆腔，所述良浆腔和所述出浆口相通，所述纸浆筛分装置包括以转子轴线为中心线在圆周方向均布的若干固定的螺旋桨状叶片，所述螺旋桨状叶片的旋向与所述碎浆机转子的螺旋叶片旋向相同；本发明不影响碎浆机内纸片的疏解运动，并可将浆液和重的杂质通过出浆口连续排出，克服了无筛板水力碎浆机频繁停机出浆的缺陷，也克服了有筛水力碎浆机需要停机清杂的难题，能耗较低，大大提高了生产效率。 论文网
要求
1.连续式高浓水力碎浆机，包括圆筒形的碎浆机槽体(1)，所述槽体(1)的底部设有出浆口(3)，所述槽体(1)内垂直安装有设有螺旋叶片的碎浆机转子(2)，所述碎浆机转子(2)的驱动端与位于槽体(1)下方的驱动装置(4)固定连接，所述槽体(1)的内腔、碎浆机转子下方设有纸浆筛分装置(5)，所述纸浆筛分装置(5)将槽体内腔分隔为碎纸腔(1a)和良浆腔(1b)，所述良浆腔(1b)和所述出浆口(3)相通，其特征是：所述纸浆筛分装置(5)包括以转子(2)轴线为中心线在圆周方向均布的若干固定的螺旋桨状叶片，所述螺旋桨状叶片的旋向与所述碎浆机转子(2)的螺旋叶片旋向相同。