菜单
  
    This paper presents an approach based on genetic algorithms for the optimal design of shell-and-tube
    heat exchangers. The approach uses the Bell–Delaware method for the description of the shell-side flow
    with no simplifications. The optimization procedure involves the selection of the major geometric param-
    eters such as the number of tube-passes, standard internal and external tube diameters, tube layout and
    pitch, type of head, fluids allocation, number of sealing strips, inlet and outlet baffle spacing, and shell-
    side and tube-side pressure drops. The methodology takes into account the geometric and operational
    constraints typically recommended by design codes. The examples analyzed show that genetic algo-
    rithms provide a valuable tool for the optimal design of heat exchangers.1. Introduction
    The transfer of heat between process fluids is an essential part of 5993
    most chemical processes. To carry out such heat transfer process,
    shell-and-tube heat exchangers are widely used because they are
    robust and can work in a wide range of pressures, flows and tem-
    peratures [1]. The traditional design approach for shell-and-tube
    heat exchangers involves rating a large number of different exchan-
    ger geometries to identify those that satisfy a given heat duty and a
    set of geometric and operational constraints [2]. This approach is
    time-consuming, and does not guarantee an optimal solution.
    Jegede and Polley [3] reported a design approach based on sim-
    plified equations that related the exchanger pressure drop, the sur-
    face area and the heat transfer coefficient; theirmodelwas based on
    the Dittus–Boelter correlation for the tube-side flow, and on the
    Kern correlations for the shell-side flow [4]. The combination of
    the pressure drop relationships with the basic exchanger design
    equation gave rise to a simple design algorithmthat avoids the iter-
    ative procedure required to test different geometries. However, the
    use of the Kernmethodmay lead to significant errors in the calcula-
    tions because of its simplified flow patternmodel for the shell-side.
    Polley et al. [5] developed an algorithmusing the Bell–Delaware
    method [6] to describe the flow pattern of the shell-side fluid. The
    model accounts for leakage and bypass streams using the flow
    model proposed by Tinker [6]. Although the model by Polley
    et al. [5] provides better estimations than the one by Jegede and
    Polley [3], some shortcomings can be mentioned. In order to keep
    the accuracy of the Bell–Delaware method, Polley et al. [5] devel-
    oped a rather complex relationship for pressure drop estimation
    on the shell-side, which requires an iterative procedure that in-
    volves detailed estimations of exchanger geometries. The algo-
    rithm also shows some lack of flexibility for the shell-side,
    because it is restricted by the assumptions that cross-flow areas
    are equal to window flow areas, and that the spacings for end baf-
    fles are equal to those for the central baffles. The second geometric
    restriction ignores cases when large inlet and outlet nozzles make
    it necessary to have higher inlet and outlet baffle spacings than
    central baffle spacings [6]. Finally, the algorithm does not take into
    account the end pressure losses on the tube-side due to contrac-
    tions at the tube inlets, expansions at the exits, and flow reversal
    in the headers.
    Recently, Serna and Jimenez [7] presented an algorithm for the
    rigorous design of segmentally baffled shell-and-tube heat
    exchangers. The algorithm makes use of the maximum allowable
    pressure drops of both streams without introducing geometric lim-
    itations. In particular, the use of two compact formulations for
    pressure drop estimations provides a simple algorithm with
  1. 上一篇:轴承合金微量成分英文文献和翻译
  2. 下一篇:建筑框架结构英文文献和翻译
  1. 便携式电子硫化机效率英文文献和中文翻译

  2. 主轴自振式钻头的加工预...

  3. 沥青填充式伸缩缝英文文献和中文翻译

  4. 平行和分布式作业破碎机英文文献和中文翻译

  5. 双曲柄环板式针摆线齿轮...

  6. 质量有缺陷的滚动轴承振...

  7. Web2.0的网络广告模式英文文献和中文翻译

  8. 乳业同业并购式全产业链...

  9. 电站锅炉暖风器设计任务书

  10. 中考体育项目与体育教学合理结合的研究

  11. 十二层带中心支撑钢结构...

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. java+mysql车辆管理系统的设计+源代码

  14. 当代大学生慈善意识研究+文献综述

  15. 杂拟谷盗体内共生菌沃尔...

  16. 大众媒体对公共政策制定的影响

  17. 河岸冲刷和泥沙淤积的监测国内外研究现状

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回