菜单
  

    or the components connected in the network will function correctly.

    Note

    Data of the “WORD“ (2 bytes) or "DWORD“ (4 bytes) type are stored in an S7-200

    in "big-endian“ format, i.e.

    Address n: MSB

    Address n+1: LSB (analogous for DWORD).

    4.4.1 Occupied system flag area (SM area)

    The CP 243-1 occupies 50 bytes in the S7-200 CPU system flag area. The address

    of these 50 bytes depends on the position in which a CP 243-1 is currently located

    in an S7-200 system. Primarily general information and status information of the

    CP 243-1 are stored in these 50 bytes. The last four bytes contain a pointer

    through which one can access the CP 243-1 configuration data. These configuration

    data is consecutively stored in the S7-200 CPU variables memory. They are

    subpided into the:

    • Configuration Data Block (CDB)

    • Network Parameter Block (NPB)

    • Network Data Block (NDB)

    The following table shows the relationship between the position of a module in the S7-200 system and the associated system flag area.

     

    Table 2: System flag area

    Note

    When using firmware version less than 1.20 then the CP 243-1 must be in position

    0 (next to the CPU) or it may be in position 1 if another intelligent module occupies

    position 0.

    4.4.2 Structure of the Configuration Data Blocks (CDB)

    The CDB is generated by the Ethernet Wizard in STEP 7 Micro/WIN 32. The following

    table shows the structure of the CDB.

     

     

     

     

    4.4.3 Structure of the Network Parameter Blocks (NPB)

    This data block is generated by the CP 243-1 itself in accordance with the current

    set of network parameters. It contains the TCP/IP parameter values currently in

    use, provided the CP 243-1 has been correctly configured. In the event of a configuration

    error, the NPB will not contain any valid data.

     

    4.4.4 Structure of the Network Data Blocks (NDB)

    The NDB is generated by the Ethernet Wizard in STEP 7 Micro/WIN 32. The

    read/write commands possible for clients are configured in this data bock. Up to 32

    read/write commands can be configured for each of the 8 possible communication

    channels. If the CP 243-1 is operated on a channel as a server, then there is no

    entry in the NDB structure for this channel.

    The following table shows the structure of the NDB. The codes for read/write commands

    are represented by the letters n, m, p = 0, ..., 31, and the channel codes are

    represented by the letter r = 0, ...,7.

     

     

    4.5 Configuring a communication partner with STEP 7

    Using the S7-300 system as an example, the following section outlines the steps

    you need to take in STEP 7 to configure the system for communication with an

    S7-200 system via the associated Ethernet communications processor. The procedure

    for the S7-400 system is similar.

    For the exact configuration steps, please refer to the STEP 7 description (MLFB:

    6ES7 810-4CC05-0YX0) or the handbooks for the CP 343-1 and the CP 443-1.

    In S7-300 and S7-400 systems, a distinction is made between configured and free

    connections. For configured connections, the connection parameters are specified

    by the user. In contrast, free connections do not have to be configured in STEP 7.

    Configured connections

    If you would like to work with a configured connection, you must first insert a new

    S7 connection in the STEP 7 NetPro program package. In the "Insert new connection"

    mask, specify the type of station with which you would like to establish a connection.

  1. 上一篇:振动台实验和动态响应地震后的钢筋混凝土建筑英文文献和中文翻译
  2. 下一篇:机床结构动态性能预测英文文献及中文翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 数控机床英文文献和中文翻译

  4. 工业机械手英文文献和中文翻译

  5. 低频振动的铁路车轴的状...

  6. 接头的形状对沥青塞接头...

  7. 数控加工技术英文文献和中文翻译

  8. 当代大学生慈善意识研究+文献综述

  9. 大众媒体对公共政策制定的影响

  10. 乳业同业并购式全产业链...

  11. 十二层带中心支撑钢结构...

  12. 杂拟谷盗体内共生菌沃尔...

  13. 中考体育项目与体育教学合理结合的研究

  14. 酸性水汽提装置总汽提塔设计+CAD图纸

  15. 电站锅炉暖风器设计任务书

  16. 河岸冲刷和泥沙淤积的监测国内外研究现状

  17. java+mysql车辆管理系统的设计+源代码

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回