菜单
  
    摘要苏州某镇工业园区配套用房位于苏州,为6层现浇钢筋混凝土框架结构,配套用房总建筑面积为5700m²,建筑高度23.2m(从室外地坪到屋面檐口)。其结构形式为现浇钢筋混凝土框架结构,安全等级为二级,设计使用年限为50 年;建筑物等耐火等级为二级;建筑抗震设防类别为丙类;地基基础设计等级为乙级。该配套用房主体结构采用钢筋混凝土现浇框架结构,柱网尺寸主要为4m×7m、2.35m×7m、2.45m×7m、3.2m×7m、4m×2.8m、4.8m×2.8m、3.2m×2.8m,总长度为56m,总宽度为16.8 m,占地面积为941平方米左右。梁、柱构件通过节点连接形成骨架结构,由梁、柱承受竖向和水平荷载,剪力墙承受水平荷载,中间隔墙仅起文护作用。底层层高为4.2m,各标准层的层高为3.8m,甲楼梯的踏步数底层和顶层取12个其他各标准层均为11个,一层、二层的楼梯的踏步高为168mm,踏步宽为260mm。楼梯的梯段宽为1.5m,中间休息平台宽为1.69m,扶手的高度为0.9m,宽度为60mm。乙楼梯的踏步数底层和顶层取12个其他各标准层均为11个,一层、二层的楼梯的踏步高为168mm,踏步宽为260mm。楼梯的梯段宽为1.9m,中间休息平台宽为1.69m,扶手的高度为0.9m,宽度为60mm。该楼主体结构采用钢筋混凝土现浇框架结构。基础采用柱下独立承台桩基础。40978
    毕业论文关键词:工业园区配套用房;框架; 结构设计。
    Abstract The structural design of insductrail estate office building in suzhouIts construction area is 5700m², 23.2m high. Its structure cast in situ reinforced concrete frame structure, the level of security for the two, the design life of 50 years; building, etc., fire resistance rating of two; building earthquake-proof category of class C; foundation design rating to Category B. The main structure of the offfice building of reinforced concrete cast wall structure, the main column net size of 4m×7m、2.35m×7m、2.45m×7m、3.2m×7m、4m×2.8m、4.8m×2.8m、3.2m×2.8m, the total width of 56m, an area of 941 square meters or so. The bottom storey is 4.2m, the standard layer-storey 3.6m. Stepping number of the bottom of theNO.1 stairs is 12 other standard layer are 11 . The height of staircase stepping on the first floor and second floor is 168mm, stepping width 260mm. Bench width of staircase 1.5ma break of platform width 1.69m, height of the handrail 0.9m, a width of 60mm. The bottom storey is 4.2m, the standard layer-storey 3.6m. Stepping number of the bottom of theNO.2 stairs is 12 other standard layer are 11 . The height of staircase stepping on the first floor and second floor is 168mm, stepping width 260mm. Bench width of staircase 1.5ma break of platform width 1.69m, height of the handrail 0.9m, a width of 60mm. Beam and column elements connected by nodes in the formation of skeletal structure, the beams, columns under vertical and lateral loads, shear wall under horizontal load, only the maintenance of the role of the middle wall. The main internal functions to meet the Faculty and dean, five, six and vice president of rooms and large conference room. The basis of independent contractors under the table by column piles. In  the construction design, the main mind is the simpler designing, the better feeling people have.
    Keywords:  Office building,Frame structure, Structure design.
    目录
    摘   要    I
    ABSTRACT    II
    第1章    绪论    1
    第2章    结构方案设计    2
    2.1 设计依据    2
    2.2 设计条件    3
    2.3设计要求    4
    2.4 结构方案    5
    2.5 主要材料    5
    2.6 梁、板、柱截面选择    7
    2.7  结构平面布置图    8
  1. 上一篇:桑夏总部大楼+CAD图纸
  2. 下一篇:上海某大型连锁超市中央空调系统设计+CAD图纸
  1. 6层上海君莲生活小区休闲...

  2. 苏州市某综合楼空调工程设计空调系统设计

  3. 苏州市某5A级写字楼空调工...

  4. 苏州市某法院大楼办公楼空调工程设计

  5. 苏州某影剧院中央空调系统设计

  6. 6层上海某综合楼中央空调系统设计+CAD图纸

  7. 苏州嘉盛花园项目可行性研究

  8. 当代大学生慈善意识研究+文献综述

  9. 酸性水汽提装置总汽提塔设计+CAD图纸

  10. 河岸冲刷和泥沙淤积的监测国内外研究现状

  11. java+mysql车辆管理系统的设计+源代码

  12. 乳业同业并购式全产业链...

  13. 杂拟谷盗体内共生菌沃尔...

  14. 大众媒体对公共政策制定的影响

  15. 中考体育项目与体育教学合理结合的研究

  16. 十二层带中心支撑钢结构...

  17. 电站锅炉暖风器设计任务书

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回