菜单
  

     The design uses a cheap and practical plastic pipe to carry out sewage drainage, rather than the traditional concrete pipe or pipe. According to the market and material properties, the final choice of PVC resin as raw material, manufacturing PVC-U double wall corrugated pipe. The stiffness of the grade is 4KPa, the nominal  Diameter 160mm, the length 3M, the wall thickness is 4mm.
    In the formulation design, the ingredient has the resin, the heat stabilizer, the lubricant, the filler, the processing modifier and the impact modifier. On the basis of synthetic consideration of the viscosity, molecular weight and degree of polymerization, the model of suspension production is PVC-SG5. Due to the heat sensitivity of PVC resin, choose the tribasic lead sulfate, dibasic phosphite lead, stearic acid, lead and barium stearate, they were mixed, so that its thermal stability is better. The lubricant chooses stearic acid, and the modified agent is copolymer ACR of methyl methacrylate and acrylate. CPE with chlorinated polyethylene (36% CL) as impact modifier formula. The ingredients of the fillers are light calcium carbonate.
    The technology of this scheme is made of twin screw extruder. Throughout the production process, experienced the material drying, metering transport, mixing, extrusion, cooling stereotypes, cutting, packaging and other processes. In the extrusion molding, the screw diameter, the ratio of the screw diameter, the depth of the screw groove, the ratio of the screw groove and the compression ratio were designed. The die parameter design of the die is also carried out, and the parameters of the die flat section, the inner diameter of the die, the diameter of the die, the diameter of the core, the ratio of drawing to the die, and the compression ratio of the die are determined. The design of the machine, the extrusion machine production capacity and die pressure drop calculation to verify the rationality of the design.
    In determining the process and the need for the machine, according to the design requirements, the equipment selection and determine the number of. There are many different equipments and models, according to the requirements of production, market costs, technological requirements etc, choose the appropriate equipment.
    In the material balance, as the entire production process, consider all aspects of loss or waste, calculation of each process in the material, and ultimately to determine initial production of each formulation components of the feeding amount, and expected losses, the calculation of the final product output. According to the actual product production capacity, design output, to design the factory to work system and workload, planning good every hour, every shift and every day of factory production capacity.
    In the energy balance calculation, the energy consumption of each part of the equipment is calculated, and the power consumption and water consumption of the process can be calculated.
    In the design of the non process, according to the design of the production process and equipment reference, the preparation of staff to meet the production needs of human labor resources. The practical water supply problem of the factory is analyzed and considered.. At the same time, pay attention to environmental protection projects, compiling requirements for waste treatment.
    Economic accounting to meet the production requirements of the premise to minimize the cost of the target, to raw material costs, packaging costs, depreciation of equipment, plant installation fees, utilities, wages, cost, management fees, profits, taxes, and the product sales price for the calculation of planning.
    Workshop layout, in after a large number of process design of books and data reading reference under considering plant design and experience of recommendation and design rationality, on plant and equipment is designed.
     
    目  录
    1绪论     - 1 -
    1.1文献综述    - 1 -
    1.1.1    埋地排污管的发展背景    - 1 -
  1. 上一篇:绿色洗面奶的配方研制+文献综述
  2. 下一篇:手性卤代醇的化学-酶法合成研究
  1. 年产50万吨乙二醇项目厂址选择与经济分析

  2. 年产12万吨二甲醚合成工艺设计+CAD图纸

  3. 年产300kg吡啶丁磺酸硫酸盐的工艺设计+CAD图纸

  4. 年产100万吨对二甲苯项目工艺设备选型

  5. 年产60万吨PX项目的分离工...

  6. 年产100万吨PX工艺系统集成...

  7. Aspen年产100万吨对二甲苯的...

  8. 酸性水汽提装置总汽提塔设计+CAD图纸

  9. 十二层带中心支撑钢结构...

  10. 电站锅炉暖风器设计任务书

  11. java+mysql车辆管理系统的设计+源代码

  12. 杂拟谷盗体内共生菌沃尔...

  13. 乳业同业并购式全产业链...

  14. 河岸冲刷和泥沙淤积的监测国内外研究现状

  15. 当代大学生慈善意识研究+文献综述

  16. 大众媒体对公共政策制定的影响

  17. 中考体育项目与体育教学合理结合的研究

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回