摘要: 本文介绍了导电杆绝缘包扎设备的绕包放卷及加热装置的设计内容。本文详细地介绍了导电杆包扎装置的国内外发展状况、分类、研究目的和使用场合。主要从导电杆绝缘包扎的工作原理、主体构造、方案设计等方面着手,对本次设计做了详细的介绍。在方案设计上,从材料角度出发,对三个方案进行分析与比较,最终确定出最优方案。在完成方案确定后,对箱体进行了结构上的设计。并对主要零部件进行强度校核和计算,主要针对导电杆绝缘包扎设备的电热丝的选择、机床的选择、热风机的选用、直流电动机的转矩进行计算。同时,对设备的检查、维护也是比较关键的,我们的一台设备要保证要求的寿命,就必须从检修、维护以及各种保养去做,只有面面俱到了,我们的产品才能达到预期的寿命。问题的处理在本次的设计中只是大概做一些介绍,但是要想完全能够解决问题,就得在实际操作中不断地去摸索。48731
毕业论文关键词:导电杆;绝缘;包扎;加热。
Conductive rod insulation wrap around the package unwinding device and the heating device design
Abstract:This article describes the conductive rod insulation wrap wrapping equipment design content unwinding and heating device. This paper introduces the development of domestic and foreign crusher, classification, purpose and use of the occasion. Mainly from the conductive rod insulation wrap works, body construction, design and other aspects of this design made a detailed introduction. In program design, from the material point of view, to analyze and compare the three programs, and ultimately determine the optimal solution. After completion of the program to determine, on the box has been designed structure. The main components and strength check and calculation, mainly for the conductive rod insulation dressing equipment selection electric wire, machine tool selection, selection, hot air DC motor torque is calculated. Meanwhile, inspection equipment, maintenance is more critical, we are a piece of equipment to ensure that the requirements of life, it must be from the repair, maintenance and a variety of maintenance to do, just everything, our products can achieve the desired life. Deal with the problem in this design just about to do some reports, however, to completely solve the problem, we have to continue to explore in practice.
Keyeords: Conductive rod; insulation; bandage; heating
目录
1 绪论
1.1 本课题的背景和意义1
1.2 导电杆在电机项目中的意义1
1.3 导电杆绝缘包扎设备的未来发展方向2 1.4 导电杆绝缘包扎设备介绍5
1.4.1 CDS6132机床5
1.4.2 Z232直流电机6
1.4.3 热风装置(包含热风管路)8
1.4.4 风刀调节装置9
1.4.5 绕包放卷调节装置9
1.4.6 绝缘材料10
1.4.7 导电杆11
1.4.8 NAB型制动器12
2导电杆绝缘包扎设备工作原12
3设计方案论13
3.1关于传动机构的方案论13
3.1.1方案一:齿轮传动机构13
3.1.2方案二:链传动机构14
3.1.3方案三:带传动机构14
3.1.4方案四:蜗轮蜗杆动机构15
3.2关于卡盘的方案论16
3.2.1方案一:三爪卡盘16
3.2.2方案二:软爪卡盘16
3.2.3方案三:气动卡盘16
3.3关于变速箱的方案论18
4导电杆绝缘包扎设备主要零件计19
4.1 原始数据19
4.2 总体方案19
4.3 机械部分设计19
4.4 参数计算20
4.4.1 电动机20
4.4.2 机床的选型22
4.4.3 热风机24